Antislip PUW - Single component water based PU antislip coating
by DCP International
Single component water based PU antislip coating
Advantages
Antislip PUW provides:
- Superb slip resistance achieving well in excess of floor safety standards.
- Excellent scratch resistance.
- Excellent stain resistance.
- Easy to apply.
- Coverage 8 m² per litre.
- No aggregate or grit.
- 1st coat dry 1 - 2 hours.
- Easy to clean and maintain.
Packaging
Antislip PUW is available in 5 ltr.
Coverage
8 m² per ltr.
Storage
Store under cover in dry area at temperatures not below 5°C.
Shelf Life
Approximately 2 years if stored in unopened containers and under good conditions.
Standards
Antislip PUW complies with requirements of HSE Risk Assessments for Floor Safety when tested according to BS 7976-2:2002 and BS 13036-4:2011.
Specification Details for Antislip PUW - Single component water based PU antislip coating (Anti-slip Floor Treatments)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that DCP International is consulted before specifying.
Physical Properties
|
||
| Max pH Value (?) | 8.5 pH | |
| Min PH Value (?) | 7.5 | |
| Scratch Resistance (?) | Excellent | |
| Shelf Life (?) | 24 Months | 100% |
| Storage Temperature (?) | 5 °C | |
| Volume Solids (?) | 34 - 36 % | |
Other
|
||
| Uniclass (?) | Pr_35_31_85_04 Anti-slip floor coatings | |
Materials & Finishes
|
||
| Drying time (?) | 120 minutes | 100% |
| Finish(es) (?) | Gloss , Matt , Satin | |
Technical
Certifications & Ratings
|
||
| British Standards (?) | BS 13036-4 , BS 7976-2 | |
Size & Weight
|
||
| Pack Size (?) | 5 l | |
File Downloads for Antislip PUW - Single component water based PU antislip coating
Contact
Contact
Contact
