Dacatie TF MultiCloser Insulated Cavity Closer
by DACATIE
TF-Multicloser is a versatile insulated cavity closer that is easy to use to achieve building regulations where cavity widths are 100mm-150mm. TF-Multicloser has pre cut grooves to simplify cutting the closer to the required cavity width. The closer will suit 100mm, 110mm, 125mm and 150mm cavity widths. Simply cut along the groove of the appropriate cavity width with a sharp knife. Cut the profile to the respective height and widths of the cavity opening and then push fit into the cavity alternatively build into the cavity using Dacatie s DTU fixing ties. When you are using the closer in a second fix application the vertical section should be a minimum of 50mm greater in height than the opening. The ribbed surface of TF-Multicloser will accept wet plaster, or plasterboard on dabs. Best practice would suggest priming the closer surface prior to finishing. TF-Multicloser is available in 2.4 metre lengths and suitable for cavities between 100mm and 150mm.
Specification Details for Dacatie TF MultiCloser Insulated Cavity Closer (Cavity Closers)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that DACATIE is consulted before specifying.
Size & Weight
Commercial
|
||
| Typical Use (?) | Cavity closers | |
Materials & Finishes
|
||
| Material (?) | EPS | |
Certifications & Ratings
Technical
|
||
| Insulation U-value (?) | 0.032 W/mK | |
| R-value (?) | 0.781 m2K/W | 85.71% |
Other
|
||
| Uniclass (?) | Pr_35_90_50 Masonry walling ancillary products | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Dacatie TF MultiCloser Insulated Cavity Closer
Similar Cavity Closers Products
Contact
Contact
Contact
