The SmokeStop DH60 can be manufactured to meet any width requirements with a maximum drop of 10.5 meters and with fixing options to suit all types of ceiling configurations to integrate with both solid and suspended ceilings. Developed and manufactured by Coopers, the SmokeStop DH60 will remain hidden within a ceiling until deployed.
The SmokeStop DH60 active smoke barrier deploys vertically to protect escalators and atria from smoke in every standard commercial building and complies to EN and ISO and is BS EN 12101-1+A1, BS EN 13501-4, BS EN 1363-1, BS EN 1634-3, BS EN ISO 9001 and BS EN ISO 14001 for fire resistance for 60 minutes integrity.
Smoke curtains are used to control and the spread of smoke in the event of a fire. Coopers SmokeStop DH60 is used where smoke control and fire resistance greater than 600 C is required.
The SmokeStop DH60 is an active smoke curtain barrier that prevents the spread of smoke for 150 minutes in the event of a fire and has been tested to a rating of DH60. This means the curtain was tested and remained intact for at least 60mins
at elevated temperatures up to 1000 C.
Active Smoke Barriers comprise technologically advanced fire-resistant fabric barriers encased in a compact steel housing. Barriers remain invisibly retracted until activated by an alarm or detector signal, at which time they descend safely to their fire operational position.
To be compliant, Smoke Barriers must be protected from a short circuit and or total power failure, this is achieved with our patented Total Gravity Fail-Safe (TGFS) system.
Smoke Barriers will control the spread of smoke in a building and protect the means of escape and create tenable conditions.
SmokeStop Smoke Barriers are designed as barriers to prevent the spread of smoke in accordance with BS EN 12101-01:2005+A1:2006 and are classified as either DH60 or D600A. SmokeStop is legally CE Marked in accordance with the Construction Products Regulations.
PRODUCT APPLICATION
ATRIA: Mitigate the lateral spread of smoke to multiple floors.
CORRIDORS: Keep smoke near the fire source to remain hot and buoyant.
STAIRS & ESCALATORS: Mitigate the spread of smoke through these openings.
SHOPPING CENTRES: Smoke baffles and smoke channelling screens.
PRODUCT ADVANTAGES
Small lightweight headboxing
Allows for uninterrupted ceiling heights. No drop down bulkheads or fixed glass smoke baffles
Creates open spaces and increases yield of workable / chargeable floor space
Is true fail-safe by gravity which means it will work when required
Ease of service
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Coopers Fire is consulted before specifying.
|
|
||
| British Standards (?) | BS 476-6 , BS 476-7 , BS 6323-5 | |
| CE Marking (?) | ||
| Standards (?) | EN 12101-1 , EN 13501-1 , EN 13501-4 , EN 1363-1 , EN 13823 , ISO 14001 , ISO 1716 , ISO 9001 | |
|
|
||
| Warranty (?) | 1 years | 100% |
|
|
||
| Application Method / Fixing Method (?) | Face fixed , I beam , Soffit , Suspended with unistrut fix | |
|
|
||
| Uniclass (?) | Pr_25_80_79 Smoke and fire barriers | |