Roof Components

    79 Products

    AshGrid

    Ash and Lacy Building Systems
    Developed and launched by Ash & Lacy in 1989, Ashgrid was the first spacer support system for built-up metal roofing and cladding. Since its launch, AshGrid has maintained its market leading position through a continued programme of research and innovative dev...

    6 specifiers have shown an interest in this product the last month.

    Access Walkways

    Roof-Pro
    Roof-Pro walkway systems provide safe access areas and routes for all personnel/trades required to visit the roof area. They contribute to improved health and safety on the roof, helping to prevent the likelihood of trips and falls around service equipment ...

    1 specifiers have shown an interest in this product the last month.

    RoofDek D100

    Tata Steel
    D100 offers a Cover width of 700 mm with a single span of over 5 m and a double span of over 7m. Material specification Galvanised steel: Tata Steel Galvatite®, hot dip zinc coated steel EN 10326-S280GD+Z275. Guaranteed minimum yield stress 280N/mm2. Minimu...

    4 specifiers have shown an interest in this product the last month.

    Raised Loft Floor (BBA approved) | LoftZone

    LoftZone
    LoftZone provides a safe access platform, or storage deck, in the loft whilst protecting up to 350mm of insulation. It is the only product approved for this purpose by the BBA, and it is superior to raising the deck with timber as it does not introduce the col...

    2 specifiers have shown an interest in this product the last month.

    Cee Sheeting Rails

    A Steadman and Son
    Sheeting rails may be selected as either Zed profile or Cee profile sections. These are formed from the same coils and are each available in the same depth and thickness range. Cees may be substituted for Zeds at window and door framing and at composite claddi...

    JI 153.280.840 Perforated Structural Deck

    Joris Ide
    The Joris Ide Group is one of the largest independent European producers of insulated and non-insulated cladding systems and components. Its product range varies from single skin profiles to continuous produced PIR and Rockwool composite panels, purlins, flash...

    1 specifiers have shown an interest in this product the last month.

    WalkSafe Fragile Roof Covers

    Latchways
    The installation of fragile roof fall protection is imperative where fragile roof access is required. If it is not possible install fall arrest systems, then the installation of passive collection protection such as Fall-Proof Covers or Rooflight Covers will e...

    2 specifiers have shown an interest in this product the last month.

    Skypod Lantern Roofs

    Deeplas
    Skypod skylights provide an innovative and alternative to aluminium skylights or conservatory roof systems that’s a beautifully cost-effective way to add height and space to a room. skypod lantern roof They’re versatile enough for most situations, wit...

    2 specifiers have shown an interest in this product the last month.

    Recycled Plastic Lumber | Mixed Plastic | Roofing Batten - 50 x 25mm

    Kedel Limited
    Model: BS2505300 REDUCE YOUR DELIVERY COST. Have your lumber cut. Small orders in lengths up to 1.5 metres and weight total less than 30 kg will be cheaper than our standard delivery. Call 01282 861325 to check before ordering. Maintenance-free - Lasts 5...

    1 specifiers have shown an interest in this product the last month.

    RoofDek D60

    Tata Steel
    RoofDek D60 offers a cover width of 800mm and a maximum single span of over 3.6m. Material specification Galvanised steel: Tata Steel Galvatite®, hot dip zinc coated steel EN 10326-S280GD+Z275. Guaranteed minimum yield stress 280N/mm2. Minimum zinc coating...

    2 specifiers have shown an interest in this product the last month.

    Did you know that the most common Material(s) for products within the Roof Components category are Galvanised Steel , Steel and Galvanising?'

    RoofDek D159

    Tata Steel
    RoofDek D159 offers a Cover width of 750 mm with a single span of over 7m and a double span of over 8.5 m. Material specification Interior liner: Tata Steel Galvatite®, hot dip zinc coated steel EN 10326-S320GD+Z150 substrate, with Colorcoat® Interior Line...

    Trapac Tile and Snow Safety Grid

    Klober
    Trapac® Tile & Snow Guard supports are the universal answer for prevention of large and deep profiled tiles and snow falling on pitched roofs. The support brackets are suitable for installation with flat and profiled concrete interlocking tiles. They are ligh...

    1 specifiers have shown an interest in this product the last month.

    RoofDek D35

    Tata Steel
    RoofDek D35 offers a Cover width of 900mm, with a maximum single span of 2.4m. Material specification Galvanised steel: Tata Steel Galvatite®, hot dip zinc coated steel EN 10326-S280GD+Z275. Guaranteed minimum yield stress 280N/mm2. Minimum zinc coating ma...

    1 specifiers have shown an interest in this product the last month.

    JB-RED Roofing Battens

    John Brash
    JB-RED is our premier roofing & tiling batten and the first full pre-graded roofing batten available to the roofing industry. This means there is no need to grade the battens on site thus saving time for the roofing contractor. This batten meets the perform...

    3 specifiers have shown an interest in this product the last month.

    WalkSafe roof walkway systems - Standing seam roofs

    Latchways
    WalkSafe walkways have been designed with a number of key features and benefits, to work with all major roof types and has approval from all the major manufacturers....

    1 specifiers have shown an interest in this product the last month.

    JI 85.280.1120 Perforated Structural Deck

    Joris Ide
    The Joris Ide Group is one of the largest independent European producers of insulated and non-insulated cladding systems and components. Its product range varies from single skin profiles to continuous produced PIR and Rockwool composite panels, purlins, flash...

    Pipe and Duct Supports

    Roof-Pro
    Roof-Pro offers a range of support systems, suitable for all sizes and types of pipe and ductwork runs. Our pre-fabricated and galvanised supports save considerable time on-site for the installation team, enabling them to support building services runs quicke...

    Condenser Unit Supports

    Roof-Pro
    PF Condenser Unit Supports are available in a number of standard sizes and designs and are stocked item for prompt supply to site. The PF range is complemented by smaller DX Units, as well as larger VRV and VRF systems. Each support solution is designed to e...

    1 specifiers have shown an interest in this product the last month.

    Posi-Joist Roof and Floor Systems

    AC Roof Trusses
    A. C. Roof Trusses Ltd was one of the first in the UK to introduce the Mitek Posi-Joist system. Posi-Joists combine the lightness of timber with the strength of the Posi-Strut Steel Web; you can span far greater distances than would be possible with alternativ...

    2 specifiers have shown an interest in this product the last month.

    Solway Maintenence Access Walkways

    Solinear
    Solinear will design and manufacture access walkways to meet the client specification requirements and also use and loading requirements of the project. Our access walkways can be supplied as modular or continuous in construction, and work in conjunction with ...

    2 specifiers have shown an interest in this product the last month.

    Did you know that the Width for products within the Roof Components category, can range from 16.666666666667 mm to 3000 mm and the average is 452 mm?

    RoofDek D32s

    Tata Steel
    RoofDek D32s is the shallowest profile available in the RoofDek Range. RoofDek D32s is available in Steel and Aluminium Material specification Galvanised steel: Tata Steel Galvatite®, hot dip zinc coated steel EN 10326-S280GD+Z275. Guaranteed minimum yield ...

    1 specifiers have shown an interest in this product the last month.

    Roof Components Building Products

    Roof components include the wide variety of different elements which are used to construct roofs in residential properties in the UK.

    The elements in a typical, timber-framed roof fall under six basic component types for any roof pitched over 25 degrees: roof coverings such as shingles, slates or tiles; sheathing or decking consisting of a skin of wood or other materials; structure such as trusses, rafters and battens; insulation, either rigid or loose; flashings made of metal or other materials covering joints, and drainage systems such as downpipes and vents.