Gebrik Insulating Brick Cladding System
by Aquarian Cladding Systems
Gebrik consists of approx 500 different natural clay Brick Slips, in a range of sizes, cast in polyurethane under factory controlled conditions.
Non load-bearing, lightweight stretcher, stack or flemish bond panels are produced to create approx 1m² ‘sheets’ which can be screwed directly to either masonry, Timber or Steel frame substrates on site.
With a full range of factory-produced or site-applied components to suit external corners, surrounds to window or door openings and any other abutments, the system can cater for most architectural designs. In fact, it could be said that as the system is not load-bearing the limits to use of the system are restricted only by the architect’s imagination.
Gebrik's insulating properties will help to significantly improve the thermal performance of your building and can reduce a buildings U-value by up to 60%.
Gebrik will protect your building from water penetration by site application of foam into chambers where panels abut.
Specification Details for Gebrik Insulating Brick Cladding System (Cladding Tiles & Slabs)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Aquarian Cladding Systems is consulted before specifying.
Size & Weight
|
||
| Height (?) | 688 mm | |
| Length (?) | 1375 mm | |
| Net Weight (?) | 28 Kg | |
| Surface Area (?) | 0.9113 m2 | |
| Thickness (?) | 60 mm | |
Technical
|
||
| Bending Strength (?) | 0.07 MPA | 0.00% |
Other
|
||
| Uniclass (?) | Pr_25_71_14 Cladding and lining panels | |
Certifications & Ratings
|
||
| BBA Certificate Number (?) | 07/2443 | |
| CE Marking (?) | ||
| Certifications (?) | BBA | |
| Standards (?) | EN 13501-1 | |
Commercial
File Downloads for Gebrik Insulating Brick Cladding System
Similar Cladding Tiles & Slabs Products
Contact
Contact
Contact
