CONVENTIONAL TRUSSED ROOF SYSTEM
by Stewart Milne Timber Systems
The system utilises pre-fabricated Roof Trusses, spandrel and gable panels and verge ladder frames. These come pre-designed, complete with all structural fixings and bracing requirements. Party wall spandrel panels can be pre-sheeted with limited combustible boards.
Where air tightness less than 3 is specified, we recommend the fitting of an air tightness membrane to the underside of the roof trusses, with a batten to the underside to accommodate services.
Where air tightness is greater than 3, the ceiling Plasterboard can act as the air barrier, with appropriate sealing at edges and joints. Fitting of plasterboard should be similar to that required for the air membrane solution.
Specification Details for CONVENTIONAL TRUSSED ROOF SYSTEM (Pitched Roofs)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Stewart Milne Timber Systems is consulted before specifying.
Other
|
||
| Uniclass (?) | Ss_30_10 Roof structure systems | |
File Downloads for CONVENTIONAL TRUSSED ROOF SYSTEM
Similar Pitched Roofs Products
Contact
Contact
Contact
