SL 25 Slide-and-turn glass panel sliding system non-insulated

The Solarlux Slide and Turn System SL 25 is a non-insulated frameless glass system. The panels can be ordered to open either internally or externally, to the left and/or to the right. The Slide and Turn System SL 25 is an All Glass System, with no vertical frames, complete transparent whilst at the time providing protection from rain, wind and noise reduction. The total element width is unlimited. Extensive layout options due to mobile carrier which can be manoeuvred through all angles from 90° to 180°are possible. For this permanently vented system, no parking station for the panels is required. The available Glass thicknesses are 6, 8 and 10 mm. Special sizes are upon request.

PROFILE SYSTEM

• Non-insulated, all-glass slide-and-turn system
  
• Linear glass pane fixed in aluminium profiles at top and bottom
  
• Panels suspended from top horizontal profiles and guided along bottom horizontal profiles using running mechanisms
  
• Top running track available with height adjustment profile; height adjustment profile with fixing bracket available as alternative
  
• Choice of horizontal bottom guide profiles: guide rail with or without fixing bracket, low-profile floor track
  
• Adjustable vertical frame (+ 15 mm on each side)
  
• Grey, weather-resistant polyamide end caps on horizontal panel profile
  
• Sliding panel can be pushed to the left and/or right towards the opening position and swings inwards or outwards to open
  

SIGHT LINES

• Frame: 2 – 68 mm
  
• Panel: 0 mm
  
• Panel joint: 0 mm
  
• Running track and guide rail building depth: 45 – 53 mm
  
• Panel building depth: 27 mm
  

GLAZING

• Heat-soaked, toughened safety glass, thicknesses 6 and 8 mm
  
• Panes polished on all edges
  

FITTINGS

• Fittings partly concealed in profiles
  
• Range of locking options for swing panels
  
• Magnetic door stay for swing panel
  
• Slim-line panel catches
  
• Safeguard at second panel exit to prevent incorrect operation
  

RUNNING MECHANISM

• Top running mechanism with sealed bearings
  
• Fibreglass-reinforced polyamide bearing surfaces for quiet running
  
• Segmented ground plans possible
  

SEALING AND VENTILATION

• Defined 3 mm vent when panels are closed ensures permanent ventilation and resistance to driving rain
  
• Lockable double-stage night ventilation on swing panel allows for controlled ventilation
  
• Horizontal double brush seal at top and bottom
  

ENVIRONMENT

• Certified disposal in accordance with DIN EN ISO 14001:2009
  
• Sustainable manufacturing
  
• Internal production control