Walk On Sky Vision

by Solar Vision

SkyVision Walk On rooflights are a fixed skylight for maximum light which can be installed where there is a requirement to walk on the Glass.

It incorporates 52mm special 3-layer glass which was tested for a load up to 500 kg per m². If required at additional costs the glass can be screen printed to add a limited slip surface.

SkyVision rooflights are CE marked according to DS/EN14351-1.

SkyVision Walk On rooflights have a U-value of 1.24 W/m²K, 115 mm Silk screen printing along the edge for UV protecting the sealing, Low ‘e’ insulated pane with thickness on 32 mm.

SkyVision Walk On is delivered with frame, sash, flashing and Screws for mounting the sash on the frame, and an installation manual, the Timber Kerbs can be ordered either 150 mm high or 300 mm high.

Solar Vision Limited provide either a supply only service or we can install SkyVisions as part of a larger project including other systems

SkyVision Walk On rooflights are available in a variety of sizes as listed below, delivery can be made in 3 – 4 weeks to any UK destination, some sizes may take longer, please contact us for prices and delivery details.

Specification Details for Walk On Sky Vision (Walk-On Rooflights)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Solar Vision is consulted before specifying.

Looking for specific information on the sustainability credentials of this product?

File Downloads for Walk On Sky Vision

Clear selection