This compact, Single walled WWHRS is easy to install, easy on the pocket and easy to maintain! As it's name suggests, it's ideal for retro-fitting in domestic and commercial properties. A very cost effective way to achieve efficiencies of up to 22%.
The Retrofit+ waste water heat recovery system can be installed under baths with showers, Shower Trays or even be boxed in next to your drain. The system had impressive success through the Green Deal home improvement scheme up until the withdrawl in September 2015 and still provides the added benefit of adding towards the silver standard for Scottish Housing Association homes.
Perfect for landlords, housing associations, Hotels or home owners wishing to save costs on their hot water usage, this system is the must have upgrade for your property. When the cost vs benefits are weighed up, we are sure it will tick all the boxes
Features and benefits:
- Compact system for ease of positioning.
- KIWA validated efficiencies of up to 22%.
- WRAS approved.
- Legionella control risk assessed.
- Extremely affordable.
- Easy to install - no major renovation or pipework required.
- Option of 3 system installation variations.
- Helps gain Silver Standard in Scotland.
- Proven success through the GreenDeal!
- Virtually maintenance free.
- SAP listed.
**Please note that Recoup are due to release the EASYFIT+ HE - A high efficiency, stand-alone horizontal WWHRS system designed to fit directly under a stand bath or walk-in shower - Please contact us for details or search 'Easyfit+ HE' on Specifedby**
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Recoup Energy Solutions Ltd is consulted before specifying.
|
|
||
| Efficiency (?) | 22 % | 14.29% |
| Features (?) | Easy to install , Legionella Risk Assessed (low risk) , Long life time , Maintenance free , Reliable , SAP Listed , Simple , Small investment , Up to 22% efficient , WRAS approved | |
| Flow Rate (?) | 5 - 12.5 l/min | |
| Max Pressure (bar) (?) | 16 bar | 100% |
| Max Working Water Temp (?) | 85 °C | |
| Min Pressure (?) | 1 bar | 100% |
| Water Volume (?) | 0.27 Litres | |
|
|
||
| Material (?) | Copper , Plastic , WRAS Approved Materials | |
|
|
||
| Uniclass (?) | Pr_60_60 Heating and cooling source products | |
|
|
||
| Typical Building Type (?) | Apartments , Hotels | |
| Typical Project Type (?) | New Buildings | |
| Typical Use (?) | Retrofit | |
|
|
||
| Certifications (?) | Kiwa , Legionella Control Risk Asseement , SAP , WRAS | |
|
|
||
| Mains Water Connection (?) | 1/2 | |