PPG - SigmaCover 280
by PPG Architectural Coatings UK
Two component polyamide cured epoxy primer.
General purpose epoxy primer in protective coating systems for steel and non ferrous metals.
Good adhesion to steel, galvanized steel and non ferrous metals.
Good water and corrosion resistance.
Suitable for touching up of weld seams and damages to epoxy coatings during construction.
Can be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy and two component polyurethane coatings.
Suitable on wet blast cleaned substrates and compatible with well designed cathodic protection systems.
Compatible with various aged coatings.
Specification Details for PPG - SigmaCover 280 (Primers)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that PPG Architectural Coatings UK is consulted before specifying.
Materials & Finishes
|
||
| Colour (?) | Brown , Green , Red , Yellow | |
| Drying time (?) | 2 minutes | 100% |
| Finish(es) (?) | Eggshell | |
| Material (?) | Polyamide cured epoxy primer | |
Technical
|
||
| Expected Life (?) | 2 years | 100% |
| Features (?) | Easy to Clean , General purpose epoxy primer for steel and non-ferrous metals , Humidity tolerant , Isocyanate free , Low temperature tolerant , Smooth film , Surface tolerant , Two component , Universal Polyamide cured epoxy anticorrosive primer | |
Other
|
||
| Uniclass (?) | Pr_35_31_66 Preparatory coatings | |
Physical Properties
|
||
| Pot Life at 20°C (?) | 8 hrs at 20°C | |
| Product Type (?) | Protective Coatings | |
| Volume Solids (?) | 57 % | |
Size & Weight
Commercial
|
||
| Brand Name (?) | PPG | |
File Downloads for PPG - SigmaCover 280
Contact
Contact
Contact
