OM226 Short Span Self-Supporting Glazing Bar, White, 2.5m
by Omega Build
The OM226 Bar can be used with multiwall polycarbonate (4mm, 6mm, 10mm, 16mm, 25mm thick).
It is supplied in a choice of white, brown or mill finish.
Each bar comes with the Aluminium base, top cap(with the Gaskets) and one end cap.
The Screws and screw-covers needed to fit the bar can be purchased separately.
This glazing bar is ideal for a roof where you have only a few rafters, but, primarily cross-Purlins (e.g. when replacing old timber greenhouse roofs, replacing corrugated Plastic roofs).
The glazing bar will self-support up to 1,400mm at the following centres
10mm Polycarbonate: 700mm.
16mm Polycarbonate: 1,000mm.
25mm Polycarbonate: 1,230mm
At the roof edges use a matching F section.
The top cap should be screwed down at 300mm intervals.
Specification Details for OM226 Short Span Self-Supporting Glazing Bar, White, 2.5m
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Omega Build is consulted before specifying.
Materials & Finishes
|
||
| Colour (?) | Brown, White | |
| Finish(es) (?) | Mill | |
| Material (?) | Aluminium | |
File Downloads for OM226 Short Span Self-Supporting Glazing Bar, White, 2.5m
Contact
Contact
Contact
