Brackets - Horizontal

NVELOPE horizontal cladding brackets come in standard dimensions of 120-300mm - A vertical bracket is converted to a horizontal bracket by rotating it 90 degrees and adding an NVELOPE horizontal bracket brace bar (HBBB) - The number of brace bars will be determined according to the application. A simple cladding support system typically consists of helping hand brackets which are fixed to the substrate at set vertical and horizontal separations. There are vertical brackets (these will be used in the majority of cases) and horizontal brackets. Profiles are then fixed into brackets. Profiles are usually vertical - L rails (normally used at intermediate locations) and T rails (normally used at panel joints) profile in section, although they can be more complex to accommodate different cladding panels. NVELOPE cladding brackets are made of aluminium EN AW-6063 T6 (former designation AlMgSi 0,5 F25) and comply with BS EN 755 as well as the common regulations for ventilated fa ades in Europe. NVELOPE vertical cladding brackets come in standard dimensions of 40-300mm and in two sizes (single and double) - each bracket has 40mm of adjustment.