Geneva Height Adjustable Bath

by Multicare Medical Ltd

The Geneva is an electrically height-adjustable bath designed to support assisted bathing in care, education, healthcare, and domestic adaptation environments. It provides a practical and cost-effective solution where safe access, carer ergonomics, and space efficiency are key considerations.


The bath offers 300 mm of electric height adjustment, operating between approximately 610 mm and 910 mm, allowing carers of different heights to work safely and comfortably. Height adjustment is controlled via a wired hand control, enabling smooth positioning for transfers and bathing.


Available in three lengths (1600 mm, 1700 mm, and 1800 mm), the Geneva can be specified to suit smaller bathrooms or more spacious hygiene rooms. The bath has a Safe Working Load of 250 kg, including water and user, and provides a water depth of up to 400 mm for a comfortable bathing experience.


Clearance beneath the bath allows the use of mobile hoists where required. For additional functionality, the Geneva height adjustale bath can be specified with a hinged shower tray, enabling users to be showered or dried over the bath with water draining directly into the tub. An optional hinged safety side rail can be added for increased user security, and the shower tray can be fitted to either side depending on room layout.


Supplied with mixer tap, hand shower, flexible waste, and plumbing connections, the Geneva is suitable for both new-build and refurbishment projects. The bath is manufactured in accordance with DS/ISO 17966:2016 and is CE certified.

Specification Details for Geneva Height Adjustable Bath (Straight Baths)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Multicare Medical Ltd is consulted before specifying.

Looking for specific information on the sustainability credentials of this product?

File Downloads for Geneva Height Adjustable Bath

Clear selection

One-Click Quote

The Geneva bath is suitable for assisted bathrooms, hygiene rooms, SEN settings, care homes, healthcare environments, and domestic adaptations where carers support users during bathing.

The bath provides 300 mm of electric height adjustment, operating between approximately 610 mm and 910 mm above floor level. Adjustment is controlled via a wired hand control.

The Geneva has a Safe Working Load of 250 kg, inclusive of the user and water, making it suitable for a wide range of adult and paediatric users.

The Geneva is available in three sizes:

1600 × 700 mm
1700 × 750 mm
1800 × 800 mm


This allows flexibility for different room sizes and layouts.

Yes. The design provides clearance beneath the bath, allowing the use of mobile hoists for assisted transfers where required.

Yes. An optional hinged stretcher can be fitted, allowing users to be showered or dried over the bath with water draining directly into the tub.

Yes. The hinged shower tray can be fitted to either side of the bath, depending on room layout and access requirements.

Yes. An optional hinged safety side rail can be specified for additional user security during bathing or showering.

Typical requirements include:

Hard-wired electrical supply (100–240 V ~50/60 Hz)
Hot and cold water supply
Drainage connection


The bath is supplied with mixer tap, hand shower, and flexible plumbing kit.

Yes. The Geneva is manufactured in accordance with DS/ISO 17966:2016 and is CE certified, making it suitable for use in assisted bathing environments.

Yes. The range of sizes and standard service connections make the Geneva suitable for retrofit installations as well as new-build projects.