Monarfloor Acoustic Tri-Batten System
by Monarfloor Acoustic Systems
FFT1 Resilient composite deep batten system. FFT3 Resilient composite standard batten system.
The Monarfloor Acoustic Tri-Batten System is designed to reduce sound transmission through Timber frame floors in a timber framed structure and can be overlaid directly with an 18mm or 22mm chipboard deck. The system consists of a 15mm layer of LRAC foam type III bonded to a timber batten with a 3mm thick geotextile fibrous isolation mat that improves impact sound performance and enables easy and secure fixing to the sub-floor.
Monarfloor Tri-Batten's should be positioned on the timber sub-floor and stapled in place through the geotextile mat. It should then be overlaid with Plasterboard plank and chipboard flooring laid in a broken bond pattern. For specific detailing please refer to our Technical Department.
When installed as part of a complete sound reduction system it enables a timber floor to meet the sound transmission regulations of Part E.
Specification Details for Monarfloor Acoustic Tri-Batten System (Acoustic Batts)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Monarfloor Acoustic Systems is consulted before specifying.
Physical Properties
|
||
| Product Type (?) | Timber | |
Other
|
||
| Uniclass (?) | Pr_25_57_06 Batt and quilt products | |
Size & Weight
|
||
| Thickness (?) | 3 mm | |
File Downloads for Monarfloor Acoustic Tri-Batten System
Similar Acoustic Batts Products
Contact
Contact
Contact
