McAlpine Pipe Clamp - Pipe Clamp to suit 1.25 inch/1.50 inch Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000
by McAlpine Plumbing Products
Pipe Clamp to suit 1.25 Inch /1.50 inch Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000.
Available in White or Grey.
Universal Connections for 19/23 Millimetre rigid pipe and 25 Millimetre flexible pipe.
Suits 1.25 Inch /1.50 inch Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000.
Receives the discharge from a condensing boiler.
Conforms to BS 6798:2009 and Building Regulations Approved Document H
Multifit Connections.
Most McAlpine Trap Outlets and Fittings have Multifit Connections.
Multifit Connections suit all plastic waste pipes to BS EN 1451-1-2000 and BS EN 1329-1:2000, copper pipe (metric or imperial) and lead pipe.
The moulded Internal Sleeve of the Connection centres and supports the pipe.
The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting.
When the compression nut is turned hand tight, the best possible mechanical joint is complete.
If a plastic pipe is undersize or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
For technical reasons it is not possible to manufacture Multifit Connections on all traps and fittings.
Where Multifit is not provided, the description Universal is applied.
The only difference being that Universal does not have an Internal Sleeve within the Trap or Fitting.
Specification Details for McAlpine Pipe Clamp - Pipe Clamp to suit 1.25 inch/1.50 inch Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000 (Tubes & Pipes Fittings)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that McAlpine Plumbing Products is consulted before specifying.
Commercial
|
||
| Brand Name (?) | McAlpine | |
| EAN (?) | 5036484008411 | |
| Product ID Number (?) | CLAMP1GR | |
| Typical Building Sector (?) | Commercial , Domestic , Healthcare , Hospitality , Leisure , Sports | |
| Typical Use (?) | Condensate Traps And Fittings | |
Certifications & Ratings
|
||
| British Standards (?) | BS 6798 | |
| Certifications (?) | Building Regulation Part H , EN 1329-1 , EN 1451-1 | |
| Standards (?) | Building Regulation Part H , EN 1329-1 , EN 1451-1 | |
Physical Properties
|
||
| Product Type (?) | Condensate Traps & Fittings | |
Other
|
||
| Uniclass (?) | Pr_65_52 Pipe , tube and fitting products | |
Size & Weight
|
||
| Diameter (inches) (?) | 1.25 - 1.5 inches | |
| Height (?) | 105 mm | |
| Length (?) | 72 mm | |
| Weight (?) | 0.1558 kg | |
| Width (?) | 40 mm | |
Materials & Finishes
|
||
| Colour (?) | Grey | |
| Finish(es) (?) | Grey Plastic | |
| Material (?) | Polypropylene | |
Technical
|
||
| Features (?) | Receives the discharge from a condensing boiler | |
File Downloads for McAlpine Pipe Clamp - Pipe Clamp to suit 1.25 inch/1.50 inch Pipe to BS EN 1451-1:2000/BS EN 1329-1:2000
Similar Tubes & Pipes Fittings Products
Contact
Contact
Contact
