Belvoir Notice Board

Product Description
Belvoir Notice Board
Our notice boards are named after the shape of their headboard. This pyramid style is called our Belvoir headboard. We can manufacturer a Belvoir notice board to be any size between 800mm wide (single door) and 3000mm wide (3 or 4 doors).
Notice board Specifications

Available in single and double sided configuration
Fabricated folded 3mm thick aluminium case
All fully welded joints and seams.
Cast aluminium head board with raised border, text and logo (if required)
Range of head boards available - Chatsworth (shown), Belvoir, Rutland, Trentham or Straight or no head board if preferred
Head board mounted with blind fixings
Weather strip for added protection
Single top hung or two side mounted door options
Doors attached with heavy duty durable brass hinges
Additional heavy duty friction coverstays on top hung door
viewable area for displays and notices - single door of 1440mm x 840mm, two door 665mm x 840mm
Clear 6mm thick high impact resistance, weather and UV resistant high clarity Palsun polycarbonate glazing
Glazing sealed in place with neoprene for additional weather protection
2 CAM locks per door for added security
Additional machined ergonomic ventilation in the sides and bottom
Silica Gel bags for added moisture control
Internal 10mm thick dark grey Sundeala pin board as standard.
All mild steel section are Hot dipped galvanised to B.S EN ISO 1461 standard
All cast aluminium sections are hand fettled and cleaned of all residual casting marks
Choice of Plain, D cor (shown) or Dartford posts with either ball, spike or capped finials
Posts and panels are finished using Icocynate and Cromate free paints

See image above for available viewable area.
You can customise this style by having open access door(s), adding your logo or crest and you can choose ANY RAL or BS colour to finish the notice board with any complementary highlight colour, all within the one cost.
The information notice board shown here is mounted on two D cor posts with decorative collars and ball finials, it is also available with the option of being mounted onto plain posts with either capped or spike finials.
Finished with a Two pack etch primer, then followed by two coats of high build primer, and then with a two pack acrylic high gloss top coat that can be in any RAL or BS colour as required, hand painted highlighting to the text, border, post ring detail comes as standard, if a logo or crest is required then this can also be hand painted to your requirements.