Kent Heavy Duty Clean Room Gully

The KVCR265/4 RD Gully is a Round Body, Round Top/Bottom Outlet Gully for
Heavy Duty Areas with High Flow Rates. This is a sealed cleanroom gully with a
strong positive seal created by machining away a 10mm groove from a 20mm top
plate. A 10mm top plate with a recessed o-ring creates the seal. This top plate is
then removable with a heavy duty suction cup available as an accessory. They are
designed for use primarily in Food/Beverage/Pharmaceutical factories. They can
be used in both light duty and very heavy duty traffi cked areas (sealed gullies are
most often used in laboratories or cleanrooms which are limited to pedestrian traffi c
- however the 10mm top plate makes it possible to drive heavy factory traffi c over
these gullies). The KVCR265/4 RD standard gully takes 10mm thick sealed gratings
but 10mm slotted and perforated gratings can also be used.
In most cases a 4 or 6 SCH10 outlet is required because these are most popular with
American Multinational Pharmaceutical companies who have scheduled stainless
steel pipework to connect to, but this can easily be substituted for a 110mm or
160mm outlet pipe. It is trapped as standard with the Kent Bell Trap.
Some features of the KVCR265/4'RD are:
Grade 304 (1.4301) or 316 (1.4401) Stainless Steel to BS EN 10088