Textured Paving 600 x 600 x 38mm

by Haddonstone

Our cast stone paving is part of our high-quality range of paving and slab solutions.
Textured paving is available in the following sizes:
300 x 300 x 38mm
450 x 450 x 38mm
600 x 300 x 38mm
600 x 600 x 38mm
General Note Paving: A well-laid foundation is essential for effective and lasting results. A fall of at least 1 in 60 is recommended. For a clean architectural appearance, the joints can be mortar-pointed. For a softer, natural appearance, paving should be laid edge to edge, un pointed, with sand brushed into the joints. This method also facilitates drainage. Cement and mortar stains are difficult to remove from paving so extreme care must be taken to keep surfaces clean. Four clear days should be allowed to elapse after construction before foot traffic is allowed over all laid areas. For vehicular traffic, special laying instructions are available on application.

Specification Details for Textured Paving 600 x 600 x 38mm (Edging)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Haddonstone is consulted before specifying.

Looking for specific information on the sustainability credentials of this product?

File Downloads for Textured Paving 600 x 600 x 38mm

Clear selection

One-Click Quote