One2Clean Plus+ 5PE - 18PE
by Graf UK
Graf Wastewater Treatment Tank with additional dosing options from 5PE to 18PE in one or two tank systems. The wastewater falls directly into the biological zone where the treatment is taking place, this allows the micro-organisms to start the breakdown process without delay. Compressed air is sent to the treatment plant via the control panel. This air is initially used for aeration through the diffuser. The aeration process is intermittent to achieve the best treatment performance. Aeration is then stopped to allow for the activated waste to sink to the bottom of the tank. Compressed air is then sent to the plant again to extract the cleaned water near the surface, via the red air-lift. This water passes through a sampling point before leaving the plant, where samples can be taken to confirm the quality of effluent. The above process occurs twice per day, each lasting 12 hours. Additional dosing can be included to achieve desired effluent quality i.e., phosphate dosing.
Specification Details for One2Clean Plus+ 5PE - 18PE (Sewage Treatment Plants)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Graf UK is consulted before specifying.
Commercial
|
||
| Range Name (?) | One2Clean Plus+ | |
| Typical Building Sector (?) | Commercial | |
Other
|
||
| Uniclass (?) | Pr_70_55_76 Sewage treatment plant | |
Size & Weight
Technical
Looking for specific information on the sustainability credentials of this product?
File Downloads for One2Clean Plus+ 5PE - 18PE
Latest news & updates for One2Clean Plus+ 5PE - 18PE
News
Over 300,000 UK Planning Applications on Hold As a Result of Nutrient Neutrality (NN)
by Graf UK 21-11-2023
Graf UK have the solutions to avoid this and are the system...
Similar Sewage Treatment Plants Products
Contact
Contact
Contact
