GW6 Patagonian Ceramic Waterless Urinal

GW6 Patagonian Waterless Urinal with GW6





Key Benefits:


unique dual valve technology for added protection against odours

small, replaceable GW6 valve core typically lasts for 6 months, often as long as a year

no special tools required for maintenance

high drainage rate - approximately 30 litres per minute, so can be sluiced

waste pipe connection can be horizontal (e.g. through panel) or vertical with flexible waste connector

reduced water and maintenance costs

manufactured in high quality cermic

Stylish design ideal for high end look washrooms

water saving reduces energy use and emissions

lower installation costs—no water or electrics





The GW6 Patagonian is a stylish waterless urinal Ideal for busy commercial environments such as offices, restaurants, Hotels, clubs and schools.
This urinal uses the long life GW6 waterless system that is tolerant of commonly used chemicals, including mild acid based cleaning products, as well as water.
The replaceable valve core within the waterless waste typically lasts for at least 6 months, often as long as a year.
If waste pipes are prone to occasional blockages, the urinal can be sluiced regularly with a diluted biological cleaner such as Gentworks Bactericidal cleaner.

The urinal is manufactured by a leading ceramics company and carries a 10 year guarantee on the quality of the ceramic.





Instead of a fluid barrier, the GW6 waterless system uses a silicone double-skirt valve which is tolerant of both water and common Cleaning Chemicals. Click here for more about the GW6.



Note: Valve core for the GW6, typically needs replacing 6 to 12 months after first use. See replacement valves for GW6 cartridges



How to avoid blockages in waste pipes

Whilst the waste pipes of Waterless Urinals block less frequently than for most flushed urinals, uric acid salts can still form a sludge which eventually cause a blockage. Sludge can be a particular problem if the waste pipes are shared with sinks or are poorly configured. Gentworks recommends periodic sluicing with Bactericidal Cleaner to break down this sludge and carry it away into the main drain. The GW6 valve can be sluiced regularly; once every 2 to 4weeks is recommended. The solution used should be approximately 1 part Bactericidal Cleaner to 9 parts warm water from the washroom hot tap. Sluicing volume should be around 1 litre per urinal for the GW6.



Includes:

- 1 x GW6 Patagonian urinal

- 1 x Set of wall Hangers

- 1 x 32mm Flexible waste connector (Mcalpine FLEXCON5)

- 1 x GW6 waterless waste




Patagonian-GW6 Product Data Sheet