Temporary Newt Fencing
by Four Seasons Fencing
Our temporary reptile Fencing is constructed from polythene which has been stabilised against ultraviolet for 2 years. This system is low cost and should be supported on tanalised Timber stakes placed at approximately 1.0m intervals. The polythene should be fixed to the timber stakes using galvanised Nails with large Plastic washers. The polythene should be dug into a narrow trench to a depth of 300mm below ground level and backfilled using the excavated earth. Complies with English Nature Great Crested Newt Mitigation Guidelines.
Specification Details for Temporary Newt Fencing (Fencing)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Four Seasons Fencing is consulted before specifying.
Size & Weight
|
||
| Depth (?) | 300 mm | |
Other
|
||
| Uniclass (?) | Ss_25_14_63 Post , rail and board fence systems | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Temporary Newt Fencing
Contact
Contact
Contact
