DAB DRENAG 1000 M-A Submersible Drainage Pump 230V with Float Switch 

DAB Drenag 1000 Submersible Drainage Pump for murky water
Pump body, impeller, motor flange, filter and filter cover, motor casing, outer casing with handle, cable compartment cover in AISI 304 Stainless Steel
Driving motor in AISI 316 Stainless Steel.
Handle coated with insulating rubber. Double mechanical seal with oil chamber interposed, carbon/alumina on motor side and silicon/silicon carbide on pump side.
Dry motor, asynchronous, watertight, cooled by the pumped liquid itself. Standard thermal protection in winding.
Capacitor permanently on in the Single-phase version.
10 metres of H07RN-F power Cables with electric plug are supplied as a standard feature.
All models can be supplied either with or withour float.
Operating range: from 3 to 24 m3/hr with head up to 14.2m
Liquid temperature range: from 0°C to +50°C, from 0°C to +35°C (domestic use)
Pumped liquid characteristics: rainwater, phreatic water, sandy water from building yards and clean waste waters, not aggressive.
Maximum working temperature: +40°C with motor out of water
Free passage through the suction grid: 10mm
Maximum immersion depth: 10m
Protection level: IP68
Insulation class: F
Installation: Fixed or portable, in a vertical position.