DELTA-PT - Tanking
by Delta Membrane Systems Limited.jpg "DELTA-PT - Tanking by Delta Membrane Systems Limited")
DELTA -PT is a special HDPE waterproofing membrane which is extruded into a series of studs. The purpose of the studs is to create a continuous air gap behind the waterproof membrane. On the face of the membrane a welded mesh allows plasters and renders to bond efficiently to achieve dry and durable finishes. DELTA -PT is watertight, resistant to high and low temperature extremes, chemically resistant to acids, alkalis, oil and solvents and is approved for use in drinking water applications. It can be used internally or externally on Walls and vaults.
Specification Details for DELTA-PT - Tanking (Tanking)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Delta Membrane Systems Limited is consulted before specifying.
Size & Weight
Commercial
|
||
| Typical Building Type (?) | Tunnels | |
| Typical Use (?) | Basements , Damp proofing , Tanking , Underground structures , Waterproofing | |
Materials & Finishes
|
||
| Finish(es) (?) | Dimpled | |
| Material (?) | High-Density Polyethylene | |
Certifications & Ratings
|
||
| BBA Certificate Number (?) | 00/3742 | |
| Certifications (?) | BBA | |
| Standards (?) | ISO 9001 | |
Technical
|
||
| Air Gap (?) | 5.5 l/m2 | 100% |
| Compressive Strength (?) | 0.07 N/mm2 | 33.33% |
| Drainage Capacity (l/s) (?) | 5 l/s | 100% |
Other
|
||
| Uniclass (?) | Pr_35_31_68 Protective coatings | |
File Downloads for DELTA-PT - Tanking
Similar Tanking Products
Contact
Contact
Contact
