Setseal 1 - Waterproofing render and screed additive
by DCP International
Setseal 1 is a highly effective and easily dispersed water repelling additive for sand /cement renders and screeds. The product is an aqueous dispersion of inorganic silicates. It is diluted with water before use and provides permanent waterproofing and reduced permeability of cement bound mixes throughout their entire mass.
The benefits of using Setseal 1 also include better resistance to chemical attack, increased frost resistance, and reduced efflorescence, all with no reduction in the strength. Setseal 1 may be used with Portland cement (ordinary and rapid hardening) and sulphate resisting cement.
Setseal 1 renders are applied in two, three or four coats depending on the water pressures involved and the type of structure.
Setseal 1 has also been used extensively for the waterproofing of basements, boiler houses, lift shafts, floors, retaining walls, swimming pools and water storage tanks.
Specification Details for Setseal 1 - Waterproofing render and screed additive (Admixtures)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that DCP International is consulted before specifying.
Technical
Other
Physical Properties
Size & Weight
File Downloads for Setseal 1 - Waterproofing render and screed additive
Contact
Contact
Contact
