Bi-Folding Speed Gates

Quikfold bi-folding speed gates offer fast and secure vehicle control, whilst also maintaining pedestrian security. The double leaf Quikfold speed gate is suitable for openings up to 12.00m, and Single leaf versions up to 6.00m (depending on height and infill). The electro-mechanical drive systems are capable of continuous operation, and can be configured for simultaneous or individual leaf operation, and for both single and bi-directional traffic control. As the name implies these fast acting gates operate at approximately 1.00metre/second. Top or bottom guide tracks and trackless versions are available to synchronize the outer gate leaves. All Quikfold speed gates are designed and built to suit specific sites. The fully programmable control panel is inverter equipped for very Smooth operation and is normally installed behind a lockable Steel door inside one of the hanging posts, but it can also be supplied in a separate weatherproof enclosure for remote mounting if preferred. The clear advantages of the Quikfold bi-folding speed gate are its speed of operation (reducing the likelihood of tailgating' and illegal pedestrian access) and, compared with conventional hinged gates, they require 50% of the operating space which is also helpful where there is a road incline in the opening direction. All Quikfold speed gates have long term corrosion protection, comply with current European safety requirements and come complete with fail safe Buffers and twin photo-cells. If required a full back up service can be provided for site surveys, design, installation, commissioning, and servicing. Free technical advice is always available at any stage, before, during or after installation.