Find, compare and price building products without wasting time on visiting, registering, & navigating multiple manufacturer websites, downloading countless technical documents for comparison, or waiting days for quotes.
Built to get you results quickly.
Products & information updated daily.
All the information you need in one place.
The largest product database in the UK.
The revolutionary development in heavy duty vertical bonding. Based on our CT1 unique sealant and construction adhesive formulation.
Power Grab n Bond is a revolutionary product in the field of heavy duty versatile bonding. It’s formulation is based on our unique hybrid polymer product CT1. The density of Power Grab n Bond is far greater allowing phenomenal results in initial grab. Coupled with the rapid curing will in the majority of applications reduce labour time by at least 50%.
With Power Grab n Bond there is absolutely no need for any additional fixings as it wFas initially developed for facade bonding. In addition Power Grab n Bond has a capacity to adhere to endless materials such as stone, granite, ytong, marble, concrete, all metals (including alloys), polystyrene and most plastics. Power Grab n Bond’s ability to bond combined materials such as wood to concrete or stainless steel to stone is incredible. As already outlined Power Grab n Bond was initially developed for façade applications, conventional methods relied on two component epoxy mix to adhere the marble or granite slab to the block wall. Depending on the weight of the slab each one would then have to be supported by drilling in ties to support each one. As with all epoxies they can be temperamental if the correct mix is not achieved. Also full cure can be between 24 and 72 hours.
Power Grab and Bond has none of these disadvantages.
Power Grab ‘n’ Bond is a unique solvent free construction adhesive with an exceptionally high initial grab followed by an incredible structural bond. It can be applied to Concrete, Most Stones, Ceramic, Marble, Wood, Gypsum Board, Metals, Lead, Glass, Mirror, Plastics (Excluding Polypropylene) and any combination of the above without any additional fixings. For application advice on sandstone type materials contact our technical department. For application advice on powder coated substrates, contact powder coating manufacturer.
|Chemical Resistance Bad (?)||High concentrations of chlorine, Chlorinated solvents, Concentrated acids|
|Chemical Resistance Good (?)||Diluted organic acids, Greases, Oils, Aliphatic solvents, Seawater, Water|
|Chemical Resistance Moderate (?)||Aromatics, Ketones, Esters|
|E-Modulus 100% (?)||1.39 Mpa|
|Elongation at Break (?)||335 %|
|Features (?)||Resists vibrations,Remains flexible,Cures with no shrinking,Fast curing|
|Max Temperature (?)||90 °C|
|Min Temperature (?)||-40 °C|
|Shore A Hardness (DIN 53505) (?)||60|
© SpecifiedBy 2019. All rights reserved.