FUHR Stable Door Hardware

A two-piece door, which can be opened in two halves. The top element can be opened independently, providing excellent ventilation, while keeping pets and children secure, or even to retain an element of security while talking to a guest. The two elements can be used together, as a normal Single door.

FUHR Stable Door gearing consists of 2 locking mechanisms, which can operate independently or in tandem. A purpose designed right angle bracket provides added strength to the interlocking sashes.

The top section, a lever/lever or split spindle operation lock, incorporates a hook, roller, latch and deadbolt.

The lower section is key operated and also incorporates shootbolt, hook, roller and a key operated deadbolt (855 type) but no latch.

Operation

To operate as a normal single door: unlock both cylinders to retract the deadbolts and push the lever to disengage locking points. When the bottom section is unlocked by the cylinder, the top shootbolt is thrown which connects to the top section.

To operate as Stable door: unlock the top section cylinder to retract the deadbolt and push the lever to disengage the locking points. The top section of the door can then be opened independently.

Hardware Required:


1 x 855 Stable door bottom section (1 hook, 1 roller)

1 x 856 Stable door top section (1 hook, 1 roller)

2 x profile cylinders (1 with escutcheon plate and 1 with a lever handle set)

2 x guide plates

4 x Door Hinges

Existing FUHR keeps to reduce stock holding