Silfra Non-Concussive Mixer Tap
by Altecnic
The wash basin push tap with temperature regulation is equipped with a cartridge that allows simple control of timing and flow rate. Timing and flow rate can be progressively adjusted using an allen key without removing the cartridge from the tap body. This means that the tap is always perfectly regulated.
Installation
It is recommended that a strainer or filter is installed upstream of the tap to prevent debris entering valve, causing damage or leakage.
Technical Specification
- Recommended operational pressure: 1 to 5 bar
- Maximum static pressure: 10 bar
- Minimum static pressure: 0.5 bar
- Maximum test pressure: 16 bar
- Maximum hot water temperature: 80C
- Working temperature range: 50 to 60C
- Maximum pressure difference between
- hot and cold water: 1.5 bar
- It is recommended to use a pressure
- reducing valve if the static pressure exceeds: 3 bar
- Time and flow rate are shown on the chart.
Specification Details for Silfra Non-Concussive Mixer Tap (Taps)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Altecnic is consulted before specifying.
Technical
Commercial
|
||
| Collection Name (?) | Silfra | |
| Product ID Number (?) | Q425251 | |
| Typical Building Sector (?) | Commercial , Education , Healthcare , Hospitality , Leisure , Sports | |
Size & Weight
|
||
| Height (?) | 148 mm | |
Other
|
||
| Uniclass (?) | Pr_40_20_87 Taps and water supply outlet fittings | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Silfra Non-Concussive Mixer Tap
Contact
Contact
Contact
