AIM Fire Stop Blocks are made from high density Rockwool stone wool. Incorporated into the building during construction, they are used to seal apertures and are permanently held in place by compression. They can also be used within metal cladding as a fire break and to protect the top flange of steel beams. AIM Fire Stop Blocks are predominantly supplied as trapezoidal sections. Square cut, rectangular or round sections are also available.
APPLICATIONS
Used to seal imperfections of fit within the construction and maintain fire compartment lines.
Predominantly supplied as trapezoidal sections, square cut, rectangular, round or sinusoidal sections also available.
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that AIM - Acoustic and Insulation Manufacturing is consulted before specifying.
|
|
||
| British Standards (?) | BS 476 | |
| Certifications (?) | Warrington Fire | |
| Fire Resistance (?) | 30 - 120 Minutes | |
| Standards (?) | EN 1366-4 , ISO 10140-2 | |
|
|
||
| Additional Notes (?) | AIM Fire Stop Blocks provide at least 14dB RW sound reduction. The acoustic performance of the floor and wall systems must also be considered when assessing the room-to-room sound reduction figure. | |
| Uniclass (?) | Pr_25_80 Smoke and fire control products | |
|
|
||
| Custom Sizes Available (?) | ||
| Shape (?) | Circular , Rectangular , Square , Trapezoidal | |
|
|
||
| Material (?) | Stone wool | |