Speed Reduction Ramp (Cable)
by Marwood Group Ltd
Manufactured from heavy-duty P.V.C. An ideal method of protecting a temporary cable or hose or reducing traffic speed. Should be laid as alternate black and yellow sections and bolted down.
Marwood Tip: Connectors for all ramps are recommended to stop separation and road creep and approach with minimum speed.
SR500/SR-500
Supplied as 500mm x 500mm x 70/75mm high sections ( Black yellow)
48mm x 33mm aperture suitable for temporary cable protection
End caps available for permanent installation if required
1mtr of ramp weights 30kg
Material composition: The ramp is composed of synthetic rubber (underlayer) and natural rubber (upper layer, yellow part)
Allowable axial weight is 12.5 T or less
Specification Details for Speed Reduction Ramp (Cable) (Speed Bumps)
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Marwood Group Ltd is consulted before specifying.
Commercial
|
||
| Product ID Number (?) | SR500 | |
Other
|
||
| Uniclass (?) | Pr_25_30_86_90 Traffic calming speed cushions | |
Materials & Finishes
|
||
| Material (?) | Natural Rubber , PVC , Synthetic Rubber | |
File Downloads for Speed Reduction Ramp (Cable)
Similar Speed Bumps Products
Contact
Contact
Contact
