Find, compare and price building products without wasting time on visiting, registering, & navigating multiple manufacturer websites, downloading countless technical documents for comparison, or waiting days for quotes.
Built to get you results quickly.
Products & information updated daily.
All the information you need in one place.
The largest product database in the UK.
Manthorpe’s External Corners are designed for use in horizontal abutment situations when a change of direction is required around an external corner.
The GW297 External Corner is used where a straight horizontal cavity tray system is required to change direction around an external corner.
Locating ribs ensure a positive overlap while the attached mastic tape creates a tight bonded seal.
The GW297 External Corner tray can also be supplied with short, standard or long lead stapled and sealed to the tray in either code 4 or code 5 (special order).
Part of the horizontal tray system
External corner used when a Horizontal or Refurbishment run of trays has to turn through a 90° angle
Removable mortar strip for easy lead application
Additional handed stop-ends.
Remove the backing from sealant tape and place the corner tray in position. Line up the horizontal trays, trimming them down to length where necessary, and press firmly into position ensuring a watertight overlapped seal is made between the trays.
Lift up the assembled trays and bed down on a thin layer of mortar.
Regulations & Standards
BS 5628-3:2005 Code of practice for the use of masonry.
BS 8000-6:2013 Workmanship on building sites. Code of practice for slating and tiling of roofs and walls
BS 8215:1991. Code of practice for design and installation of damp-proof courses in masonry construction.
NHBC Standards 6.1
BRE DIGEST 262/380.
|Size & Weight|
|Height (?)||155 mm|
|Length (?)||265 mm|
|Width (?)||265 mm|
|Product ID (?)||GW297|
|Materials & Finishes|
|Certifications & Ratings|
|Standards (?)||BRE Digest 262/380, NHBC Standards 6.1, BS 8215, BS 8000-6, BS 5628-3|
|Features (?)||Part of the horizontal tray system. External corner used when a Horizontal or Refurbishment run of trays has to turn through a 90° angle. Removable mortar strip for easy lead application. Additional handed stop-ends.|
© SpecifiedBy 2019. All rights reserved.