Find, compare and price building products without wasting time on visiting, registering, & navigating multiple manufacturer websites, downloading countless technical documents for comparison, or waiting days for quotes.
Built to get you results quickly.
Products & information updated daily.
All the information you need in one place.
The largest product database in the UK.
Johnstoneâ€™s Flat Matt is a high quality dead matt emulsion suitable for all interior walls and ceilings, providing a completely flat finish with excellent opacity, coverage and application.
Type of substrates: Wood, metal and plaster. Also suitable for use on wall boards, concrete, cement rendering, brickwork and block work in internal situations. Johnstoneâ€™s Flat Matt will cover approximately 12-14 square metres per litre depending on the nature and porosity of the surface being painted.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare surfaces with the appropriate Johnstoneâ€™s Primer. Rub down previously gloss
painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Stir well. Easy to apply by brush or roller. Also suitable for application by spray. Seal absorbent surfaces with a coat of Flat Matt thinned up to 10% with clean water. If more than one can of a colour is to be used in the same area, intermix before use.
|Materials & Finishes|
|Drying time (?)||240 minutes|
|VOC Content (?)||30 g/l|
|Type (?)||Wallboards, Plaster, Concrete, Cement Render, Brickwork, Blockwork|
|Volume Solids (?)||27 %|
Â© SpecifiedBy 2019. All rights reserved.