Building Product Research,
Without the Hassle.

Find, compare and price building products without wasting time on visiting, registering, & navigating multiple manufacturer websites, downloading countless technical documents for comparison, or waiting days for quotes.

Fast - Built to get you results quickly image

Built to get you results quickly.

Accurate - Products & information updated daily image

Products & information updated daily.


Convenient -All the information you need in one place image

All the information you need in one place.

Comprehensive - The largest product database in the UK image

The largest product database in the UK.

X
Grant Engineering (UK) Ltd
HVAC & Cooling Systems ">> Boilers > DHW Storage / Cylinders

Grant DuoWave Plus Cylinders

by Grant Engineering (UK) Ltd

Grant DuoWave Plus Cylinders

by Grant Engineering (UK) Ltd

/>
Stainless steel open-vented or unvented indirect triple-coil mains pressure hot water cylinders for combining solid fuel, biomass, gas, electric or oil-fired boilers and solar thermal systems.

The Grant DuoWave Plus is a further development of the DuoWave cylinder range and is available in a 300 litre model only. The cylinder is designed to combine different heating technologies within a single system by utilising up to three separate high performance heating coils and one 3kW immersion heater.

Design specifications

When installed as an open vented cylinder, it is possible to combine a solid fuel or wood burning appliance with an oil or gas boiler. An additional heat source, such as solar thermal can also be linked using the high performance coil, located at the bottom of the cylinder.

The unvented version is similar in design, but incorporates all of the additional controls necessary to use the unit in an unvented system installation. It enables up to three separately controlled heat sources to be linked together. This is particularly useful when combining traditional fossil fuel appliances like oil or gas boilers with renewable technologies like heat pumps, solar thermal or fully controlled wood pellet (biomass) boilers.

Installation

*If the DuoWave Plus is to be connected to a non-thermostatically controlled appliance (e.g. Solid fuel back boiler), the cylinder must be installed in an open-vented system to comply with current Building Regulations. Note: In an open-vented system, the T+P Valve would not operate in pressure mode, but may still operated on temperature, so it should be connected in the correct manner (see installation manual).
Scroll across to view all table contents


Grant DuoWave Plus Cylinders

One-Click Quote


Specification Details for Grant DuoWave Plus Cylinders (DHW Storage / Cylinders)

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Grant Engineering (UK) Ltd is consulted before specifying.

Specifications

Create your free account to view, compare and extract specifications data

File Downloads for Grant DuoWave Plus Cylinders

Clear selection

File Downloads

Create your free account to freely download CAD files, BIM objects, images & more.