Rendering

    88 Products

    Render Only System to Timber Frame Construction

    JUB Systems UK Limited
    JUB Render Only System for application to timber frame construction via the use of a JUB Approved Render Board. High strength and durable base-coat used with the range of JUB low maintenance finishes, including, silicone, acrylic, silicate, mineral, self-clean...

    8 specifiers have shown an interest in this product the last month.

    High Performance Render Basecoat

    Johnstone's Trade
    Johnstone’s Stormshield High Performance Render Basecoat is a flexible, vapour permeable, polymer modified product which is designed for high levels of adhesion when applied directly to suitable masonry surfaces or when used as a basecoat for all Johnstone...

    19 specifiers have shown an interest in this product the last month.

    High Performance Silicone Enhanced Render

    Johnstone's Trade
    Johnstone’s Stormshield Silicone Enhanced Render has been formulated for use as a part of a Johnstone’s Stormshield system consisting of Basecoat, Primer and Render. This system is ideal for rendering direct to substrate or as part of the Johnstone’s Ext...

    42 specifiers have shown an interest in this product the last month.

    CASEA Bauprotec 700 – Tanking & Plinth Render

    Smet Building Products Ltd
    CASEA Bauprotec 700 is a factory produced Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2003. It is manufactured from a controlled blend of selected aggregates, cement, polymers, fibres and other components to g...

    2 specifiers have shown an interest in this product the last month.

    Warm Wall Basis

    Knauf
    This basic standard system significantly reduces energy costs and is an economic solution. Energy lost is reduced by using of the Warm Wall Basis system and improves the thermal performance of any building. Warm Wall Basis systems can be used for new projects,...

    3 specifiers have shown an interest in this product the last month.

    CASEA Mineral Finish Coat – K

    Smet Building Products Ltd
    Mineral Finish Coat – K is a factory produced mineral based, high quality finish coat render, specially designed for hand and machine application to EN 998-1 2003. It’s manufactured from a controlled blend of the purest white calcium hydrate, white cement ...

    11 specifiers have shown an interest in this product the last month.

    Stolit - Rendering

    Sto
    The original acrylic render. Stolit is universally tintable in the full 800 colours of the StoColor System, and features high colour stability with no need for an equalisation coat. Easy to apply with a trowel or airless spray machine, and with optimum adhesio...

    20 specifiers have shown an interest in this product the last month.

    Warm Wall Plus

    Knauf
    Knauf Marmorit Warm Wall systems are the most cost effective way to insulate new and old buildings providing efficient thermal properties and allowing for creative designs. Warm Wall Plus has the added advantage of sound reduction and superior fire protection,...

    12 specifiers have shown an interest in this product the last month.

    StoSilco - Rendering

    Sto
    A true silicone resin render, available in 764 colours from the StoColor System. Extremely high water repellence makes StoSilco the ideal render for areas exposed to harsh weather and at risk of algae growth....

    16 specifiers have shown an interest in this product the last month.

    Silicone Render

    Alumasc Facades
    OVERVIEW ST Silkolitt high performing silicone renders are highly water-repellent, vapour permeable and weather resistant Manufactured from high quality silicone resin and UV resistant colour pigments, Silkolitt offers excellent durability from a thin system ...

    1 specifier has shown an interest in this product the last month.

    Did you know that the most common Finish(es) for products within the Rendering category are colours , silicone and texture?'

    High Performance Full Silicone Render

    Johnstone's Trade
    Johnstone's Stormshield Full Silicone Render is a high performance thin coat render formulated with silicone resins to offer a highly vapour permeable and water resistant finish. Render overview: To be used with Johnstone's Stormshield High Flex Render Sy...

    5 specifiers have shown an interest in this product the last month.

    EuroMix General Purpose Render

    CPI EuroMix
    Sand and cement rendering is an everyday task, but with spray applied EuroMix General Purpose Render the job is transformed – it is four times quicker, way cheaper and much less hassle. It's no wonder that EuroMix is the most popular spray applied render on ...

    3 specifiers have shown an interest in this product the last month.

    Render Only System to Steel Frame Construction

    JUB Systems UK Limited
    JUB Render Only System, designed to be applied to a JUB approved render board fixed to a steel frame construction. Highly strong and durable fibrous basecoat with the application of glass fibre reinforcing mesh, primer and one of the low maintenance JUB topcoa...

    2 specifiers have shown an interest in this product the last month.

    CASEA Bauprotec SLP – Tanking & Plinth Render

    Smet Building Products Ltd
    CASEA Bauprotec SLP is a factory produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2003. It is manufactured from a controlled blend of selected aggregates, cement, polymers, fibres and other co...

    1 specifier has shown an interest in this product the last month.

    High Performance Silicone Enhanced Render Primer

    Johnstone's Trade
    Johnstone’s Stormshield Silicone Enhanced Render Primer is a silicone based, ready to use, through coloured primer that is highly weather resistant and vapour permeable. This product must be applied as a barrier coat between Johnstone’s Stormshield High Pe...

    8 specifiers have shown an interest in this product the last month.

    CASEA Bauprotec 850 M – Lightweight Lime Cement Render

    Smet Building Products Ltd
    Bauprotec 850 M is a factory produced Lightweight Lime Cement Render, specially designed for hand and machine application produced to EN 998-1: 2003 and is CE Marked. Bauprotec 850 M is manufactured from a controlled blend of selected aggregates, lightweigh...

    3 specifiers have shown an interest in this product the last month.

    StoSuperlit

    Sto
    A robust acrylic render with exposed aggregate for a natural stone appearance, available in 13 colours. StoSuperlit can be applied over entire surfaces or as a highlight on entrance axes, balconies and plinths....

    25 specifiers have shown an interest in this product the last month.

    High Performance Scratch Render

    Johnstone's Trade
    A traditional through colour render system for exterior masonry surfaces. Stormshield Scratch Render is a high quality, cement based formulation that has been modified with polymer to provide a durable and attractive all weather solution for any project. This ...

    5 specifiers have shown an interest in this product the last month.

    Render Only System to Masonry

    JUB Systems UK Limited
    JUB offer a number of solutions for rendering existing or new masonry. For existing masonry substrate the use of a primer before the application of the base-coat will be required. The base-coat will be applied to 10mm thickness with a layer of glass fibre rein...

    3 specifiers have shown an interest in this product the last month.

    High Performance Dash Receiver Render

    Johnstone's Trade
    A modern, high technology render system, formulated for application to traditional masonry substrates and developed using polymer modified technology. This Stormshield dash render system offers a high degree of flexibility and crack resistance. With a wide ran...

    2 specifiers have shown an interest in this product the last month.

    Did you know that the most common Colour(s) for products within the Rendering category are Grey , white and Concept range?'

    MORCEMDUR ® R – Lightweight One Coat Render

    Smet Building Products Ltd
    MORCEMDUR® R is a factory produced Lightweight Single Coat Render specially designed for hand and machine application produced to EN 998-1 2010. It is manufactured from a controlled blend of selected aggregates, lightweight aggregates, white cement, polymers,...

    2 specifiers have shown an interest in this product the last month.

    Rendering Building Products

    On SpecifiedBy, you can search over 130+ Rendering from leading External Wall Finishes manufacturers including; K Rend, Saint Gobain Weber and Baumit UK.

    You can see a full list of manufacturers of Rendering here.

    Other popular types of External Wall Finishes include; Rainscreen Cladding, External Wall Panels and Timber Cladding.

    Important criteria to consider when specifying Rendering include; Material(s), Colour(s) and Typical Use.