Structural Components & Protection

    400+ Products

    Steel Lintel CG50/125

    Catnic
    Cavity Wall lintel, for 50-65mm Cavity, 125-140mm Wide Inner Leaf, for standard duty loads...

    Steel Lintel CG70/125

    Catnic
    Cavity Wall lintel, for 70-85mm Cavity, 125-140mm Wide Inner Leaf, for standard duty loads...

    1 specifiers have shown an interest in this product the last month.

    Steel Lintel CG90/125

    Catnic
    Cavity Wall lintel, for 90-105mm Cavity, 125-140mm Wide Inner Leaf, for standard duty loads...

    Steel Lintel CG50/100

    Catnic
    Cavity Wall lintel, for 50-65mm Cavity, 100-115mm Inner Leaf, for standard duty loads...

    Steel Lintel CG70/100

    Catnic
    Cavity Wall lintel, for 70-85mm Cavity, 100-115mm Inner Leaf, for standard duty loads...

    Steel Lintel CG90/100

    Catnic
    Cavity Wall lintel, for 90-105mm Cavity, 100-115mm Inner Leaf, for standard duty loads...

    Steel Lintel CG110/100

    Catnic
    Cavity Wall lintel, for 110-125mm Cavity, 100-115mm Inner Leaf, for standard duty loads...

    Steel Lintel CTF9

    Catnic
    Timber Frame lintel, for 90-105mm Cavity, 102mm Outer Leaf, for standard duty loads...

    pro clima DB plus

    Ecological Building Systems
    The principal raw material used to produce pro clima DB+ is recycled paper which is strengthened with a reinforcement layer. DB+ is an environmentally friendly option for the sustainable house builder. Features: - pro clima DB+ is an internal paper based hu...

    Eaves Steel Lintels L1E

    IG Lintels
    Lintel Must be built in with blockwork & continuous wall plate as shown. Continuous wall plate must be provided above openings & reveals. Lintels may be propped to facilitate speed of construction....

    2 specifiers have shown an interest in this product the last month.

    Did you know that the most common Style for products within the Structural Components & Protection category are Functional , Hidden Vent and Renaissance?'

    Protech GM PP

    A Proctor Group
    Protech GM PP is a loose - laid, geo - membrane that is mainly used as a waterproofing liner for attenuation tanks, balancing ponds, lagoons and reed beds. The membrane can also be used as a gas barrier to protect against Methane and Carbon Dioxide on sites wi...

    4 specifiers have shown an interest in this product the last month.

    Tri-Seal

    Triton Systems
    Damp proof membrane and water vapour suppressant. A solvent free, two part epoxy resin coating, typically used as a surface damp proof membrane and a water vapour suppressant. Well suited for use as a water and water proof barrier, beneath raised access floors...

    3 specifiers have shown an interest in this product the last month.

    Butyl Tape DS100

    CETCO
    Dual-purpose air seal and moisture barrier tape. BUTYL TAPE DS100 is a dual-purpose air seal and moisture barrier tape developed especially for sealing lap joints on VOLDRAIN ICD (Internal Cavity Drain) applications, VOLSHEET DPC, and VOLSHEET GB....

    Curtain Wall Barrier

    ARC Building Solutions
    The ARC Curtain Wall Barrier has been designed to provide a 3 hour smoke and fire barrier where curtain wall cladding systems are used. It seals the gap between compartment floors or walls and the external curtain wall. Manufactured from mineral wool with rein...

    3 specifiers have shown an interest in this product the last month.

    Tuscan Column - Fluted

    Cranborne Stone
    Cranborne Stone Fluted Tuscan Columns can be used for building a Portico or creating a Colonnade. Available in six regional colours. Our Fluted Tuscan Columns are available in the following forms: Full - with classically correct entasis. Split vertically (...

    T-Barrier for Metal Frame

    ARC Building Solutions
    The ARC Metal Frame T-Barrier® System has been designed to provide a fire rating at the party wall junction within a metal frame construction. The 3-piece system fits in conjunction with the 'C' sections at the party wall detail and provides a 4 hour fire rat...

    Fire Stop Strip

    ARC Building Solutions
    The ARC Fire Stop Strip prevents the passage of smoke and flames through narrow voids in buildings. Manufactured from high density rockfibre mineral wool, it is held in place by compression. Possible applications include: top of masonry wall under soffit, abov...

    Wallint® 50

    Klober
    Klober’s Wallint® 50 is a combined air barrier and vapour control layer. It has a vapour resistance of 250MNsg, meeting the requirements of BS9250 (Code of Practice for design of the airtightness of ceilings in pitched roofs). As even thicker layers of insu...

    Steel Lintel BXD100

    Catnic
    100mm Classic box lintel for use in solid or block walls. Offers a cost effective solution for extra heavy duty loads...

    Steel Lintel BXD140

    Catnic
    140mm Classic box lintel for use in solid or block walls. Offers a cost effective solution for extra heavy duty loads...
    Did you know that the Diameter for products within the Structural Components & Protection category, can range from 55 mm to 1000 mm and the average is 538 mm?

    Cavity Stop Socks & TCBs

    ARC Building Solutions
    ARC Cavity Stop Socks and TCBs have been designed to restrict the spread of smoke and flames within external masonry and timber frame walls, and to further minimise the effect of flanking noise pollution at wall junctions. They are produced from low resin, non...

    Structural Components & Protection Building Products

    On SpecifiedBy, you can search over 500+ Structural Components & Protection from leading Structural Frames & Walls manufacturers including; Catnic, Contour Casings and IG Lintels.

    You can see a full list of manufacturers of Structural Components & Protection here.

    You can refine your search further by various types of Structural Components & Protection, such as; Lintels, Structural Fire Protection and Damp-Proof Membranes (DPM).

    Important criteria to consider when specifying Structural Components & Protection include; Material(s), Length and Certifications.