Want personalised Wiring Drivers recommendations, direct from manufacturers?
x
Next
Next
Next

👏 Thanks

We’ve received your request and we’ll be in touch shortly (by email) with your product recommendations.

PDC/GRID DIMMER

Collingwood Lighting
The PDC/GRID DIMMER is ideal for dimming LED lighting products via 1-10V LED power supplies. You can dim as many dimmable LED products per dimmer in line with the capability of the LED power supply and adjust your brightness levels at minimum and maximum...

C100924 Controller

Collingwood Lighting
The C100924 is essential in making any Collingwood Lighting colour change installation work. Receiving the signal from your remote control or device using RF is what makes this a simple and quick method to achieving atmospheric lighting. By removing the n...

WCR 375 BLACK

Collingwood Lighting
A 3-core cable suitable for extending the cable provided with the Collingwood range of outdoor products, supplied on 100m reels for low voltage use only and suitable for permanent use outdoors due to its rubber outer....

WCR 275 BLACK

Collingwood Lighting
A 2-core cable suitable for extending the cable provided with the Collingwood range of outdoor products, supplied on 100m reels for low voltage use only and suitable for permanent use outdoors due to its rubber outer....

PLU/PP/350 1-9

Collingwood Lighting
A power supply for the 350mA range of Collingwood products, wired in series and able to run 1-9 1W or 1-3 3W LED products. Contains mains loop in/loop out terminals for easy installation of multiple LED power supplies and a pre wired plug and play extension...

DMX RS 485 CABLE

Collingwood Lighting
Reducing interference is very important when transferring signal as part of a DMX colour changing installation. Use this cable to join the DMX2102 to DMX controllers. This will help reduce interference, quicken installation and eliminate signal issues. C...

PDC INT 1-10V

Collingwood Lighting
Convert Collingwood s PDC range of 24V LED drivers in to a dimmable power supply by simply adding the PDC INT 1-10V to the circuit. Dimming either by push to make or 1-10V analog really adds value to the 24V range of LED products and functionality to any li...

JB2 (SERIES)

Collingwood Lighting
A small and discreet waterproof housing for wiring Collingwood s outdoor products in series. Comprising of 1 input and 1-3 outputs allows you to add multiple products safely, further JB2s can be linked together until the capacity of the LED power supply is ...

PLU/350 1-9

Collingwood Lighting
A power supply for the 350mA range of Collingwood products, wired in series and able to run 1-9 1W or 1-3 3W LED products. Contains mains loop in/loop out terminals for the mains side for easy installation of multiple LED power supplies and can be used in c...

UY2 CONNECTOR

Collingwood Lighting
A gel filled waterproof connector for use with products containing 0.205mm cable. Not suitable for mains voltage....

PLU/PP6/350 1-9

Collingwood Lighting
A power supply for the 350mA range of Collingwood products, wired in series and able to run 1-9 1W or 1-3 3W LED products. Contains mains loop in/loop out terminals for easy installation of multiple LED power supplies and a pre wired 6-way Plug & Play exten...

PLDCC/700 12-24

Collingwood Lighting
A power supply for the 700mA range of Collingwood products, able to run with an input of between 12V & 24V DC ideal for connecting to a leisure battery bringing LED lighting to boats, caravans and mobile homes. Power up to 3 x 3W LED with 12V input or 6 x 3...

LED RGB 0.75 CABLE

Collingwood Lighting
Ideal for extending the exact cable supplied on products making your installation simply and easy. Can be used in conjunction with all RGB products. Features & Benefits: Suitable for RGB wiring Can be wired to additional JB3 for multiple fittings ...

PLDM70011

Collingwood Lighting
A 9W mains dimmable LED power supply for the DM01 LED module. Comes complete with a female plug for Plug & Play connectivity with the module. Power up to 1 module per power supply and dim using most leading and trailing edge dimmers. Use in conjunction with...

PLD-UNIDRIVE (350)

Collingwood Lighting
A dimmable power supply for the 350mA LED range of Collingwood products, wired in series and able to run 1-10 1W or 1-3 3W LED products. Capable of dimming via a press to make switch or 1-10V analogue using the PDC/GRID DIMMER with the added option of linki...

PLD-UNIDRIVE (700)

Collingwood Lighting
A dimmable power supply for the 700mA LED range of Collingwood products, wired in series and able to run 1-9 3W LED products. Capable of dimming via a press to make switch or 1-10V analogue using the PDC/GRID DIMMER with the added option of linking up to 10...

PLDCC/350/10-28

Collingwood Lighting
A power supply for the 350Ma range of Collingwood products, able to run with an input of between 10V & 28V DC ideal for connecting to a leisure battery bringing LED lighting to boats, caravans and mobile homes. Power up to 3 x 1W LED with 12V input or 6 x 1...

IX 365

Collingwood Lighting
A corrosive resistant, waterproof housing for the 24V range of Collingwood Lighting LED power supplies, made from plastic, IP rated to 65 and suitable for 5-way main leads makes this a quick and simple way of installing in an outdoor environment....

IX 265

Collingwood Lighting
A corrosive resistant, waterproof housing for the PLU/350 1-9 LED driver, made from plastic and IP rated to 65 makes this a quick and simple way of installing in an outdoor environment....

WC 5-9

Collingwood Lighting
A quick release waterproof joint suitable for mains voltage, capable of being submersed up to 9m and compatible with WCR275 cable from the Collingwood range....