Search 30+ Protection Systems from leading Substructure manufacturers including; Cordek, Styrene Packaging & Insulation Ltd and CETCO.

You can see a full list of manufacturers of Protection Systems here.

Other popular types of Substructure include; Tanking, Piling and Ground Beams.

Important criteria to consider when specifying Protection Systems include; Certifications, Typical Use and Colour(s).

Stylite Clayfill & Clayfill Pile Collars

Styrene Packaging & Insulation Ltd
Stylite Clayfill Boards are manufactured from low-density, highly compressible Expanded Polystyrene (EPS) and used to protect concrete foundations against lateral ground heave. Clayfill is installed on the vertical inside face of piled ground beams or deep tre...

1 specifier has shown an interest in this product the last month.

Cellcore HX S

Cordek
Cellcore HX S is designed for use beneath reinforced concrete floor slabs to protect against the potential effects of ground heave. The product consists of a cellular construction of Filcor EPS (Expanded Polystyrene) which has been designed, moulded and tested...

19 specifiers have shown an interest in this product the last month.

Cellform HX System

Cordek
Cellform HX combines the benefits of Cellcore HX B with an economical and simple to install permanent formwork system. Each Cellform HX panel is supplied to the required beam width and depth, allowing them to be quickly installed with the range of accessories ...

10 specifiers have shown an interest in this product the last month.

Radon Cavity Barriers

Cavity Trays
Cavity Trays Limited has developed a range of petheleyne radon prevention barriers. The barriers are installed in cavity walls around the perimeter of a structure. They are so proportioned and shaped to encourage rising radon gas within the cavities, to be arr...

4 specifiers have shown an interest in this product the last month.

Bentonite Coarse

CETCO
BENTONITE COARSE is a granular bentonite composed of polymer-free, dried clay in various mesh sizes....

1 specifier has shown an interest in this product the last month.

Super Gel-X

CETCO
SUPER GEL-X® is a 200 bbl yield bentonite drilling fluid for maximum viscosity. Controls filtration rate for borehole stabilization and prevention of fluid loss....

9 specifiers have shown an interest in this product the last month.

Premium Gel

CETCO
PREMIUM GEL® is a 200 mesh, 90 bbl yield sodium bentonite for freshwater drilling. Complies with API 13A Section 9 from the 16th edition of the Specifications for Drilling Fluid Materials, February 2004....

6 specifiers have shown an interest in this product the last month.

GeoTrax GX 20/20T & 30/30T Biaxal GeoGrid

Groundtrax Systems Ltd
GeoTrax™ GX Biaxal Geogrids are engineered materials suitable for short and long term soil reinforcement applications. They are composed of high modulus polyester fibres, knitted in a flat orientation and covered with a protective polymeric coating....

2 specifiers have shown an interest in this product the last month.

CE Grade - Protection Systems

CETCO
CE GRADE is a sodium activated bentonite which has been processed to enhance rheological properties for civil engineering applications....

Hydro-Pac - Protection Systems

CETCO
HYDRO-PAC™ is a dry hybrid-polymer drilling fluid. HYDRO-PAC is an innovative breakthrough in drilling fluids and containment fluids due to its ability to use saltwater as the hydrating mix water....

2 specifiers have shown an interest in this product the last month.

Thnking face emoji
Did you know that the most common Certifications for products within the Protection Systems category are Building Confidence , ISO 14001 and ISO 9001?'

Insta-Pac - Protection Systems

CETCO
INSTA-PAC™ is a highly concentrated liquid polymer designed for fast field mixing and drilling applications to increase viscosity and inhibit hydration of clay and shale....

5 specifiers have shown an interest in this product the last month.

Hydraul-EZ

CETCO
HYDRAUL-EZ® is a specially treated bentonite drilling fluid designed for directional drilling. Suspends cuttings and maintains borehole integrity....

8 specifiers have shown an interest in this product the last month.

Claymaster Pile Collars

Cordek
Claymaster Pile Collars are compressible low density Expanded Polystyrene (EPS) products, used when foundations need to be protected against ground heave. As an integral part of the Cordek Cellcore ground heave system, they aid installation by fitting securely...

2 specifiers have shown an interest in this product the last month.

Insta-Vis Plus

CETCO
INSTA-VIS™ PLUS is a liquid polymer designed to improve drilling efficiency in both horizontal and vertical drilled holes through its rapid field mixing, viscosity development, and clay and shale inhibition....

1 specifier has shown an interest in this product the last month.

Rel-Pac - Protection Systems

CETCO
REL-PAC® Natural cellulosic, granular polymer designed for building a low solids drilling fluid with increased stability. Forms a tight, thin filter cake that reduces fluid loss to the formation....

1 specifier has shown an interest in this product the last month.

Cellvent HX

Cordek
Cellvent HX combines the benefits of the Cellcore HX range with Ventform to alleviate the effects of ground heave whilst also providing an excellent gas venting medium. It is designed for use under suitably reinforced ground floor slabs where subsidence is not...

1 specifier has shown an interest in this product the last month.

Versafoam Plus

CETCO
VERSAFOAM® PLUS is an ultra high-yielding, biodegradable liquid foaming agent for fresh or saltwater air rotary drilling....

2 specifiers have shown an interest in this product the last month.

Super Pac - Protection Systems

CETCO
SUPER PAC™ is a multi-purpose liquid polymer designed for minimizing fluid loss to the formation. Enhances properties of bentonite drilling fluids and creates optimum drilling efficiency through filtration control....

Drill-Terge

CETCO
DRILL-TERGE™ is liquid solution of non-ionic surfactants formulated to increase detergency and wetting properties of drilling fluids. Designed to work in fresh or saltwater to reduce torque and drag....

3 specifiers have shown an interest in this product the last month.

Gas and Water Outlets and Service Entry Points

Cavity Trays
The introduction of gas control barriers in cavities dictates one installs means by which all arrested gas and water can be routed out of the structure. Additionally, where services penetrate any membrane or barrier the entry point must be suitably sealed. A r...

1 specifier has shown an interest in this product the last month.

Thnking face emoji
Did you know that the most common Typical Use for products within the Protection Systems category are Freshwater mud rotary drilling , Inhibit clay and shale hydration and Casing seal?'

Soda Ash - Protection Systems

CETCO
SODA ASH is the common name for sodium carbonate, which separates calcium into sodium and carbonate ions in solution....

Protection Systems Building Products

Search 30+ Protection Systems from leading Substructure manufacturers including; Cordek, Styrene Packaging & Insulation Ltd and CETCO.

You can see a full list of manufacturers of Protection Systems here.

Other popular types of Substructure include; Tanking, Piling and Ground Beams.

Important criteria to consider when specifying Protection Systems include; Certifications, Typical Use and Colour(s).