Cleaning & Maintenance Fittings

    42 Products

    Flood Barriers

    Flood Control International
    Flood Control International offers four types of flood barrier to ensure the right flood solution is provided:Demountable Flood Barriers, Glass Flood Barriers, Flip-up Flood Barriers and Drop-Down Flood Barriers. The flood barrier design varies from a simpl...

    1 specifier has shown an interest in this product the last month.

    Birch Cleaner's and Laboratory Sink

    Armitage Shanks
    Laboratory and cleaners sink in fireclay, manufactured in two sizes, 51 x 38 and 46 x 38 cm. For use in laboratories, public buildings and schools. Legs and bearers are a commonly chosed option to the build-in brackets shown. Heavy duty sink Institutional app...

    7 specifiers have shown an interest in this product the last month.

    Stanchion System for Wide Openings

    Floodgate Ltd
    The stanchion system allows multiple Floodgates to be connected together to form a continuous flood protection barrier. The system comprises two basic parts; a blue, powder coated mild steel upright and, a grey stainless steel ground anchor that the upright b...

    Alder Heavy Duty Cleaner's Sink

    Armitage Shanks
    Heavy duty cleaners’ sink in fireclay, 51 cm x 38 cm with high splashback and bucket grating. For use in public buildings, schools and hospitals. Legs and bearers are a more commonly chosen option to the build-in brackets shown....

    4 specifiers have shown an interest in this product the last month.

    HM16-83 - Laundry Equipment

    Miele Professional
    The HM16-83 rotary ironer is ideal for ironing workwear and laundry on the smallest of footprints. The ironer has fast trough heating and optimum heat distribution for consistent ironing results and has a variety of temperature settings to provide gentle treat...

    Armitage Shanks Dee Built in No-tap-Hole Sink and Right Hand Slophopper Stainless Steel (S6551)

    Commercial Washrooms
    Armitage Shank's Dee S6551MY (Right Hand) and S6552MY (Left Hand), this is determined by where the hopper unit is postioned as you look at the unit, built in no-tap-hole sink and right hand slop hopper has been purpose made for use in a modern Hospital or S...

    2 specifiers have shown an interest in this product the last month.

    PM1210 - Rotary Ironer

    Miele Professional
    The PM1210 flatwork ironer has been designed to provide operators with the most helpful set of controls, as well as giving businesses the capability to achieve a high output of pressed laundry. This ironer is all about delivering the perfect finish through cle...

    Protecting Doorways

    Floodgate Ltd
    Floodgates comprise of a 25mm thick, boxed steel frame covered by a 7mm thick blue neoprene cover. A jacking mechanism attached to the rear of the frame allows both the frame and cover to expand telescopically widthways into the walled area (the reveal) immed...

    Franke DUG Hospital or Domestic Services Disposal Sink Unit (G22041N)

    Commercial Washrooms
    Franke manufactured 1.2mm thick 304 stainless steel DUG hospital disposal sink unit, incorporating sluce hopper. A wall hung hospital/domestic services disposal unit manufactured from 1.2mm thick, grade 1.4301 (304) stainless steel with satin polish finis...

    1 specifier has shown an interest in this product the last month.

    PM1625 - Laundry Equipment

    Miele Professional
    The new PM1625 flatwork ironer has a range of innovative product features making it ideal for OPLs and contract laundries. With a roller speed of up ot 16m per minute and a roller width of 1750mm, the PM1625 flatwork ironer can process up to 1.6 tonnes of laun...
    Did you know that the Cost per Unit for products within the Cleaning & Maintenance Fittings category, can range from 343 £ to 762.3 £ and the average is 522 £?

    PM1621 - Laundry Equipment

    Miele Professional
    The new PM1621 flatwork ironer has a range of innovative product features making it ideal for OPLs and contract laundries. With a roller speed of up ot 16m per minute and a roller width of 1750mm, the PM1621 flatwork ironer can process up to 1.6 tonnes of laun...

    HM16-80 - Laundry Equipment

    Miele Professional
    The HM16-80 rotary ironer is ideal for ironing workwear and laundry on the smallest of footprints. The ironer has fast trough heating and optimum heat distribution for consistent ironing results and has a variety of temperature settings to provide gentle treat...

    Chemical Spill Containment

    Flood Control International
    Flood Control International offers a full range of chemical spill containment products to protect against chemical spillage or fire-fighting run-off. Our secondary containment barriers can isolate a whole site or just part of a site to retain chemical spill...

    800136 | Ceramic sink outlet 63mm

    Arboles UK Ltd
    Part Code : 800136 Ceramic sink outlet 63mm Manufactured in White fireclay. European specification free draining where no plug is supplied. To be installed with a bonded waste adaptor Part No: A636-063015 ...

    Electrolux EWX147410W Integrated 7kg/4kg Washer Dryer

    Magnet Ltd
    The Electrolux EWX147410W washer dryer is an integrated model that will help you create a seamless look in your kitchen. It has a 7kg wash capacity that can clean up to 7 outfits at a time, while the 4kg drying capacity is ideal for a few essentials. It has a ...

    3 specifiers have shown an interest in this product the last month.

    PM1217 - Rotary Ironer

    Miele Professional
    The PM1217 flatwork ironer ensures high laundry throughput, user-friendly operation and optimum ironing results. It allows operators to have the flexibility and control they need to achieve the perfect finish and quality when pressing sheets, napkins and towel...

    1 specifier has shown an interest in this product the last month.

    PM1214 - Rotary Ironer

    Miele Professional
    The PM1214 flatwork ironer gives operators the flexibility and control to achieve the maximum output of pressed laundry through clever features and functions. With its ergonomic design, operators are easily able to deliver perfect finish and quality to busines...

    Cleaners Low Back

    Shaws of Darwen
    Practical low back fireclay cleaner's sinks, designed to withstand heavy use. Available in 2 sizes. Acid and alkali resistant. Antibacterial glazed surfaces. Designed to withstand heavy use. Stainless steel bucket grating. Pre-drilled fixing holes. ...

    1 specifier has shown an interest in this product the last month.

    Baby Belfast

    Shaws of Darwen
    Based on the traditional Belfast, the Baby Belfast is a smaller, more compact sink. Iconic in style and designed with a traditional weir overflow, it is ideal as a laundry garage or utility sink. 1 1/2 inch waste outlet. Lifetime warranty. Luxurious, dur...

    2 specifiers have shown an interest in this product the last month.

    Larch Sinks

    Arboles UK Ltd
    Part Code : Larch Sinks Various sizes of quality larch sinks. Suitable for under slung or inset applications. Manufactured in white fireclay ...

    1 specifier has shown an interest in this product the last month.

    Zanussi ZWT71201WA Integrated 7kg/4kg Washer Dryer

    Magnet Ltd
    This Zanussi ZWT71201WA washer dryer is ideal if you want an easy to use model that will blend into your kitchen, thanks to its integrated design. It s 7kg wash capacity can clean up to 7 outfits at a time, while its 4kg drying capacity will help to dry your l...

    1 specifier has shown an interest in this product the last month.

    Cleaning & Maintenance Fittings Building Products

    On SpecifiedBy, you can search over 50+ Cleaning & Maintenance Fittings from leading Furniture & Fittings manufacturers including; Magnet Ltd, Miele Professional and Acorn Powell.

    You can see a full list of manufacturers of Cleaning & Maintenance Fittings here.

    You can refine your search further by various types of Cleaning & Maintenance Fittings, such as; Laundry Equipment, Cleaners Sinks and Flood & Fire Damage Equipment.

    Important criteria to consider when specifying Cleaning & Maintenance Fittings include; Material(s), Depth and Product ID.