Search 20+ Lightning Protection from leading Communications, Transport & Security manufacturers including; Earthmet

You can see a full list of manufacturers of Lightning Protection here.

You can refine your search further by various types of Lightning Protection, such as; Lightning Conductor SystemsImportant criteria to consider when specifying Lightning Protection include; Diameter, Height and Width.

Free-Standing Air Terminals

Earthmet
A range of free-standing lightning interception terminals for the protection of roof-mounted equipment on surfaces where no penetration of the roof structure for anchoring is allowed. We recommend that all concrete bases are installed using the Protective Roo...

2 specifiers have shown an interest in this product the last month.

Free-Standing Air Terminal Supports

Earthmet
A range of supports to suit the free-standing air terminals are available. a) Square plate support for use up to 4m terminal height. Supplied in Stainless Steel b) Tripod Support for use between 4.5m and 10m terminal height. Supplied in Stainless Steel c) Q...

Air Rods - Lightning Conductor Systems

Earthmet
Tapered Air rods form an important part of the air termination network of a lightning protection system. These air rods are used as part of the lightning protection system. They are manufactured from 10mm diameter rod and are supplied with a locknut. a) Tape...

1 specifier has shown an interest in this product the last month.

Interceptor Plates

Earthmet
These Earthmet interceptor plates fit under the roof tile and are connected onto the lightning protection system. The square plate protrudes from the tile and provides the interception point. 500mm x 50mm x 50mm. Supplied in both Gunmetal and Aluminium...

1 specifier has shown an interest in this product the last month.

Couplings - Lightning Conductor Systems

Earthmet
Couplings enables the flat tape to be connected to the air rod. When couplings are used in conjunction with the side mounting air rod brackets. Supplied in both Gunmetal and Aluminium....

Strike Pads

Earthmet
This strike pad is used where it is not possible to install conductor on the roof or side of a building. A typical application would be on the roof of a car park where the conductor is laid underneath the tarmac and the strike pads fitted on top. Supplied in ...

Bimetallic Connectors

Earthmet
These bimetallic connectors are used to join 8mm aluminium and copper solid circular conductors together. They are a neat and practical jointing method without the need for tinning, riveting or wrapping the joint. a) Aluminium and Copper Tapes – For 25mm x ...

3 specifiers have shown an interest in this product the last month.

Slate Holdfasts

Earthmet
Earthmet slate holdfasts provide a method for fixing the tape or circular conductor above the roof tiles without any drilling. The aluminium tail slides underneath the tile and is fixed to the wooden beam with a nail, the non-metallic DC clip then protrudes fr...

1 specifier has shown an interest in this product the last month.

Universal Cable Connectors

Earthmet
This connector is suitable for joining cables in a test point as part of the lightning protection system. Universal Cable Connectors – to suit 50mm2, 70mm2 and 95mm2 cable...

Clamps - Lightning Conductor Systems

Earthmet
a) Square Tape Clamp – These four-way connectors are suitable for making cross, straight through or tee joints in flat tape. 25mm x 3mm, 25mm x 6mm, 31mm x 3mm, 38mm x 6mm, 50mm x 3mm, 50mm x 6mm. Supplied in both Gunmetal and Aluminium b) Oblong Junction ...

2 specifiers have shown an interest in this product the last month.

Thnking face emoji
Did you know that the Diameter for products within the Lightning Protection category, can range from 8 mm to 20 mm and the average is 12 mm?

Cable to Tape Connectors

Earthmet
This Earthmet four-way connector is suitable for crossing over flat copper tape and bare stranded copper cable. It will also serve for making straight through joints and tee connections. To suit 50mm2, 70mm and 95mm2 cable to 25mm x 3mm tape...

Solid Circular to Tape Connectors

Earthmet
This Earthmet four-way connector is suitable for crossing over flat tape and solid circular conductor. It will also serve for making straight through joints and tee connections. Conductor size – 8mm and 25mm x 3mm Supplied in both Gunmetal and Aluminium....

1 specifier has shown an interest in this product the last month.

Air Rod Saddles

Earthmet
a) Light Duty – M16 and M20 in both Gunmetal and Aluminium b) Ridge Saddles – M16 in both Gunmetal and Aluminum c) Flat – M16 in both Gunmetal and Aluminium d) Multi purpose – M10 in both Gunmetal and Aluminium e) Cable Saddles – M16 in Gunmetal...

Puddle Flange

Earthmet
The puddle flange is used where the down conductor must pass through a roof or waterproof membrane. Available in size 600mm x 150mm x 150mm. Supplied in both Copper and aluminium...

Concrete Bases

Earthmet
The Protective Roof Pad suits all bases and protects a waterproof roofing membrane from damage. a) Concrete Square used in conjunction with Square Plate Support. Supplied in 12kg and 16kg base weights b) Concrete Round used in conjunction with Tripod and Qu...

Circular Conductor Shoes

Earthmet
Circular conductor shoes are used to bond 8mm bare solid circular conductors to metal surfaces. Supplied in both Gunmetal and Aluminium...

Glazing Bar Holdfasts

Earthmet
Originally designed to be used on glazing units but can be installed wherever the conductor has to be fixed onto a narrow flange. The holdfast is assembled with a fixing screw for use with a metallic or non-metallic DC clip. 35mm L x 22mm W x 20mm H in both G...

Watermain Pipe Bond

Earthmet
Designed to bond large diameter pipes into the earthing and lightning protection systems. For use up to 26mm max width and supplied in both gunmetal and aluminium...

Pyramid Holdfast

Earthmet
The Pyramid Holdfast is designed to support 8mm diameter bare solid circular conductors on flat roofs. Plastic filled with concrete...

1 specifier has shown an interest in this product the last month.

Rainwater Pipe Bond

Earthmet
This pipe bond can be used on any application where tape can be wrapped around circular objects such as pipes or rails, For use up to 26mm max width and supplied in both gunmetal and aluminium...
Thnking face emoji
Did you know that the Height for products within the Lightning Protection category, can range from 4 mm to 12 mm and the average is 8 mm?

‘B’ Bonds

Earthmet
These Earthmet ‘B’ bonds are used for bonding aluminium and copper tapes to flat metal surfaces. Sizes available – 25mm x 3mm conductor and supplied in both gunmetal and aluminium...

Lightning Protection Building Products

Search 20+ Lightning Protection from leading Communications, Transport & Security manufacturers including; Earthmet

You can see a full list of manufacturers of Lightning Protection here.

You can refine your search further by various types of Lightning Protection, such as; Lightning Conductor SystemsImportant criteria to consider when specifying Lightning Protection include; Diameter, Height and Width.