Want personalised Waterproofing Membranes recommendations, direct from manufacturers?
x
Next
Next
Next

👏 Thanks

We’ve received your request and we’ll be in touch shortly (by email) with your product recommendations.

Search 110+ Waterproofing Membranes from leading Film & Foil manufacturers including; Acrypol Products Ltd, CT1 and Delta Membrane Systems Limited.

You can see a full list of manufacturers of Waterproofing Membranes here.

Other popular types of Film & Foil include; Glass, Timber-Based Boards and Films & Coatings for Glass.

Important criteria to consider when specifying Waterproofing Membranes include; Material(s), Colour(s) and Finish(es).

WT1 - Waterproofing Technology No.1 - Waterproof Membrane

CT1
INTRODUCING… WT1 – Waterproofing Technology No.1 REPAIR, WATERPROOF, SEAL WT1 is the ultimate replacement for all bitumen based roof membrane with excellent adhesion to brick, stone, concrete, polyester, lead, metals and plastics. WT1 is a comp...

Oldroyd Xp Plaster Membrane (Plaster Lath)

Safeguard Europe
Oldroyd Xp Plaster Membrane (formally Oldroyd P) is a studded polypropylene waterproofing membrane with a special mesh welded to one side. It is fixed to damp, contaminated walls using Oldroyd Plaster Plugs, with the studs facing the wall. This creates an air-...

DELTA-MS20

Delta Membrane Systems Limited
DELTA -MS20 is a compression-resistant, durable dimpled sheet made from special high density polyethylene. This is a heavy gauge version of DELTA -MS with deep 20 mm studs. This is used where extra drainage capacity is required, for example on deeper structure...

DELTA GEO-DRAIN Quattro

Delta Membrane Systems Limited
Compact 4 layer composite membrane used externally, vertically and horizontally. The Geo-Drain Quattro has a very high compression strength, and acts as a protection layer over flexible waterproofing. It can be used up to depths of 10 metres. It is manufacture...

DELTA-MS DRAIN

Delta Membrane Systems Limited
Dimpled sheet with an integrated drainage layer. Simple and cost-efficient foundation for dry cellar walls. Improved performance, improved protection. See MS-500 membrane for internal membrane application....

DELTA-NP DRAIN

Delta Membrane Systems Limited
Compact two layer composite membrane. High drainage capacity through specially-configured dimples. Acts as a protection and drainage layer up to 5m deep....

DELTA-TRELA PLUS

Delta Membrane Systems Limited
Structured separating layer for ventilated and non-ventilated pitched roofs with metal covering. As DELTA-TRELA PLUS, with integrated self-adhesive edge for fast, windproof laying....

Novia BS 4016 - Type 2 Breather Paper for walls

Novia Ltd
Novia BS 4016 - Type 2 Breather Paper is a traditional wall breather membrane, made to meet the requirements of BS 4016 Type 2.This is a CE Approved product for use as a Breather Membrane to EN 13859-2 (Part 2 - Underlays for Walls) and is fully CPR compliant....

Gripdeck Flexcoat - Solvent free polyurethane crack bridging membrane

DCP International
Gripdeck Flexcoat is a two-part, solvent free polyurethane membrane formulated for application by squeegee, roller or brush to concrete and screed substrates primed with Gripdeck Primecoat E prior to overcoating with Gripdeck Primecoat (Bodycoat) followed by G...

DELTA-DRAIN

Delta Membrane Systems Limited
Two-way dimpled sheeting with integral geotextile for the protection of foundation wall waterproofing against mechanical damage and for reliable drainage of stratified water and slope water. Manufactured with a geotextile layer to filter out fines from the dra...
Thnking face emoji
Did you know that the most common Material(s) for products within the Waterproofing Membranes category are polyethylene , Polypropylene and High-Density Polyethylene?'

Drybase Flex

Safeguard Europe
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion...

Proofex Engage

Fosroc
Proofex Engage is a pre-applied membrane which mechanically bonds to poured concrete. This unique patented waterproof membrane system incorporates a cell mesh, bonded to a blended polyethylene / polypropylene membrane, which allows poured concrete to interlo...

Acriflex Winter

Diasen
Two-component liquid waterproofing membrane with high technology content. Highly elastic and long lasting, resistant to ponding water, UV rays, high and low temperatures, weathering agents and to freeze-thaw cycles. It can be applied with low thicknesses with...

POLYDAN 180-40 P ELAST.   

Danosa
POLYDAN 180-40 P ELAST. is a waterproofing sheet made of SBS modified bitumen mastic. Composed of a non-woven polyester felt reinforcement and covered on both sides with a polyethylene film. Tested according to the standards EN tests methods....

POLYDAN 180-30 P ELAST.   

Danosa
POLYDAN 180-30 P ELAST. is a waterproofing sheet made of SBS modified bitumen mastic. Composed of a non-woven polyester felt reinforcement and covered on both sides with a polyethylene film. Tested according to standard EN test methods....

 ESTERDAN 50/GP POL GREEN GARDEN  

Danosa
ESTERDAN 50/GP POL GREEN GARDEN is a waterproofing bituminous sheet with self-protected surface of 5 kg/m², LBM-50/G-FP R (APP -15 ºC). Composed of a reinforced polyester felt reinforcement, covered on both sides with polymer modified bitumen mastic. On the...

ESTERDAN PLUS 50/GP ELAST. GREEN GARDEN  

Danosa
ESTERDAN PLUS 50/GP ELAST. GREEN GARDEN is a waterproofing bituminous sheet with self-protected surface of 5.0 kg/m², LBM(SBS)-50/G-FP R. Composed of a reinforced polyester felt reinforcement, covered on both sides with SBS modified bitumen mastic. On the up...

Aquabit - Waterproofing Membranes

Diasen
Single-component bituminous waterproofing paste, ready to use, characterized by the presence of polystyrene spheres that allow a thick application and give to the product an high covering and filling capacity and an excellent workability. The product is appli...

POLYDAN 180-60/GP ELAST.   

Danosa
POLYDAN 180-60/GP ELAST. is a waterproofing bituminous sheet with self-protected surface of 5.6 kg/m². Composed of a non-woven polyester felt reinforcement, covered on both sides with SBS modified bitumen mastic. On the upper side of the sheet, mineral protec...

POLYDAN PLUS F.M 180-60/GP ELAST.   

Danosa
POLYDAN PLUS F.M 180-60/GP ELAST. is a waterproofing bituminous sheet with self-protected surface of 5.6 kg/m². Composed of a reinforced and stabilized polyester felt reinforcement, covered on both sides with SBS modified bitumen mastic. On the upper side of ...
Thnking face emoji
Did you know that the most common Colour(s) for products within the Waterproofing Membranes category are mastic , grey and light grey?'

Proofex Hydromat

Fosroc
Proofex Hydromat is a pre- or post-applied bentonite waterproofing membrane consisting of of two elements – Natural sodium bentonite as the sealing material. Two layers of geotextile to encapsulate and contain the bentonite. A continuous layer of natural so...