Fasteners & Anchoring Devices

    300+ Products

    Ancon WP3 Windpost System

    Ancon Building Products
    Ancon Windposts span vertically between floors to provide lateral support for panels of brickwork. The WP3 is a channel section windpost which installs within the cavity leaving the blockwork undisturbed....

    6 specifiers have shown an interest in this product the last month.

    Ancon 500 Tension System

    Ancon Building Products
    High performance tension bar system, available in carbon or stainless steel, typically used to restrain roof timbers, canopies, masts and areas of glazing....

    Everdry Leaded Stepped Cavity Trays for Blockwork

    Alumasc Timloc Building Products
    BBA approved stepped cavity tray system supplied with integral lead flashings for installation at the abutment of pitched roofs of 12.5°+ with an external cavity wall. For external walls not exceeding 150mm thickness and built from block or stonework with reg...

    5 specifiers have shown an interest in this product the last month.

    Y-Fit hanger

    Gripple
    Single hanger with double hanging points, improves stability and centre of gravity • Ideal for cable tray or basket, or where access to services is required • One leg can be detached to allow access to cables, etc. • Available in a range of end-fixings, ...

    1 specifiers have shown an interest in this product the last month.

    Ancon WP2 Windpost System

    Ancon Building Products
    Ancon Windposts span vertically between floors to provide lateral support for panels of brickwork. The WP2 is an angle section windpost. One leg of the post is built into the blockwork....

    1 specifiers have shown an interest in this product the last month.

    Trapeze No2

    Gripple
    Ideal for fast suspension of cable containment, air conditioning cassettes, chilled beams, etc. Tapered design - accommodates all slots sizes Discreet - fits completely inside the channel Pre-fits onto channel to ease working at height Pin allows rapid adjustm...

    1 specifiers have shown an interest in this product the last month.

    Starlocks Push On Fasteners for Metric Round Shafts

    Baker & Finnemore Ltd
    Standard Starlocks are available in Spring or Stainless Steel. Non standards may be subject to minimum order quantity. Spring Steel Finishes: Bronze & Varnish (BV) or Mechanical Zinc Plated (DT). Stainless Steel: Self Colour....

    TD Dowels

    Permaban Ltd
    This trapezoidal dowel plate offers excellent load bearing, and resistance to bending and shear.  It’s easy to install - simply fix the dowel sleeve to the formwork on the first side, pour the concrete, remove the formwork, and insert the dowel plates into ...

    Forster norm 

    Forster Profile Systems (UK) Ltd
    The Forster norm profile assortment is suitable for the construction of doors, screens and windows without thermal break....

    Retro Fixed Brackets

    Sapphire Balustrades
    Retro-fixed brackets are structural connections for metal balconies which are not built in at the time of construction. Brackets designed for this purpose can be bolted onto the completed building structure, before the external envelope finishes are completed....

    1 specifiers have shown an interest in this product the last month.

    Did you know that the most common Certifications for products within the Fasteners & Anchoring Devices category are ISO 9001 , ISO 14001 and BBA?'

    Ancon MDC-R Masonry Support

    Ancon Building Products
    MDC-R is a bespoke stainless steel masonry support system with a reversed angle welded to the bracket...

    Unleaded System 2000 Horizontal Cavity Trays (Taped Joint)

    Alumasc Timloc Building Products
    Preformed horizontal cavity tray system, including corner and stop end units, suitable for new build and exsisting wall refurbishment of brick, block and stonework constructions. Sections join together to form a water tight seal, by means of a lapped joint, wh...

    2 specifiers have shown an interest in this product the last month.

    Eaves Closer

    Klober
    The Eaves Closers are only required when counterbattens are located above the roofing underlay. They are fixed using corrosion resistant nails directly into the bottom edge of the counter batten at the eaves or into a continuous edge batten along the complete ...

    2 specifiers have shown an interest in this product the last month.

    SX6

    SFS intec
    Austenitic stainless steel self drilling fasteners for general construction to steel structure....

    Ancon WP1 Windpost System

    Ancon Building Products
    Ancon Windposts span vertically between floors to provide lateral support for panels of masonry. The WP1 is a lipped channel section windpost which installs within the cavity leaving the blockwork undisturbed....

    1 specifiers have shown an interest in this product the last month.

    Porotherm Roller 190mm

    Porotherm
    A Roller to apply the ZeroPlus mortar allows for the swift and simple creation of true 1mm bed joints. Assembly methods for Porotherm are easy to understand, and the blocks can be laid extremely quickly to achieve a strong and accurate structure....

    3 specifiers have shown an interest in this product the last month.

    Porotherm Roller 365mm

    Porotherm
    A Roller to apply the ZeroPlus mortar allows for the swift and simple creation of true 1mm bed joints. Assembly methods for Porotherm are easy to understand, and the blocks can be laid extremely quickly to achieve a strong and accurate structure....

    1 specifiers have shown an interest in this product the last month.

    Frame Cramps

    Expamet Building Products
    The Power- tie range includes a comprehensive choice of stainless steel frame cramps including versions with holed or slotted upstands, safety end or plain end options for fixing to concrete, steel and masonry. V- drips or vertical twists are provided to preve...

    Thermo-loc 30 Minute Fire Rated Cavity Closer

    Alumasc Timloc Building Products
    30 minute fire rated cavity closer to close the cavity at external doors, window jambs and sills. Provides DPC and thermal insulation at external doors and window jambs and sills and prevents damp and cold bridging. Rigid and lightweight UPVC profiles fitted w...

    3 specifiers have shown an interest in this product the last month.

    Porotherm Roller 140mm

    Porotherm
    Mortar is easily dispensed onto the Porotherm block when the mortar applicator is used....
    Did you know that the Length for products within the Fasteners & Anchoring Devices category, can range from 14 mm to 6000 mm and the average is 375 mm?

    MFT-MFI L Bracket

    Hilti
    Material composition: EN AW-6063 T66. Height: 166 mm. Width: 68 mm. ...

    Fasteners & Anchoring Devices Building Products

    On SpecifiedBy, you can search over 300+ Fasteners & Anchoring Devices from leading Building Materials manufacturers including; Ancon Building Products, ACS Stainless and Alumasc Timloc Building Products.

    You can see a full list of manufacturers of Fasteners & Anchoring Devices here.

    You can refine your search further by various types of Fasteners & Anchoring Devices, such as; Wall Ties, Fixing Clips / Brackets and Cavity Fixings.

    Important criteria to consider when specifying Fasteners & Anchoring Devices include; Material(s), Length and Typical Use.