200+ Products • Concrete & Cement

    Streetscape® High-Strength Bedding Concrete

    Smet Building Products Ltd
    A superior quality polymer modified High-Strength Bedding Concrete, manufactured under an ISO 9001 quality controlled environment; using dried sands, lime, cement and additives specially designed to meet or exceed the requirements of BS 7533 part 7 & 12. The p...

    3 specifiers have shown an interest in this product the last month.

    Hardiebacker Cement Board

    James Hardie
    Help prevent mold and moisture damage in wet areas by installing HardieBacker 1/4 in. or HardieBacker 500 cement board. You'll get superior performance with a limited lifetime warranty. Damp areas, such as bathrooms and kitchens, require high-performance produ...

    5 specifiers have shown an interest in this product the last month.

    One Part Waterproofing Sealing Slurry

    Norcros Adhesives
    Norcros One Part Waterproofing Sealing Slurry is a flexible, fibre reinforced cementitious waterproofing membrane suitable for waterproofing balconies, basements and swimming pools. It is suitable for use on concrete structures, render and cementitious screeds...

    Belzona 4141 (Magma-Build) 

    Belzona Polymerics Ltd
    A lightweight epoxy repair composite for rebuilding damaged vertical and overhead concrete and masonry surfaces. This high-build concrete repair material can be applied up to 12.7 cm (5 inches) thick on vertical surfaces and up to 7.6 cm (3 inches) thick on ov...

    Dramix Steel Fiber Reinforcement For Industrial Floors

    Bekaert
    Industrial concrete floors need to be impact resistant and durable. Other key requirements are: high load bearing capacity and resistance to crack formation and fatigue. Dramix® steel fibers meet all these requirements. Steel fiber concrete is thinner, cheap...

    Supercast Synkoflex FR

    Fosroc
    Supercast Synkoflex is a non-swelling preformed plastic adhesive waterstop of dimensions 25mm x 25mm. It can be laid onto fresh concrete, or applied to existing concrete when used in conjunction with Supercast Synkoflex Primer. Supercast Synkoflex FR is a fuel...

    KOSTER 1C Injection Pump

    Koster Aquatecnic
    Electrical 1C injection pump for injecting of cracks and voids. It is suitable for the injection of all KÖSTER injection materials (foams and resins). Operating pressure can be adjusted from 0 - 200 bar. The maximum delivery rate is approx. 2.2 l / min....

    PLANICRETE

    Mapei UK
    Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders (eg Nivoplan)....

    Waterstop RX101

    CETCO
    Self-injecting hydrophilic waterstop for concrete construction joints. WATERSTOP RX101 is a sodium bentonite based waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a...

    2 specifiers have shown an interest in this product the last month.

    Bostik Screedmaster Deep

    Bostik
    A protein-free, high strength, high performance, deep self-levelling compound based on a blend of cements and organic binders....

    245 Form Seal

    Grace
    A glossy, hard and attractive polyurethane coating having outstanding resistance to abrasion, wear, splash & spillage of acids, solvents, salts, alkalis and water. An excellent coating for chemical processing and similar uses, and as a heavy-duty floor coating...

    1 specifiers have shown an interest in this product the last month.

    Bostik Screedmaster Smooth

    Bostik
    A single part, high strength, polymer modified, cementitious underlayment. Suitable for application by trowel and by mortar screw pump when mixed with the appropriate quanity of clean, cold water....

    Monolevel 844SP

    Flexcrete Technologies Ltd
    Monolevel 844SP is a fully waterproof, engineering quality fairing coat for filling minor blow holes and defects, and for repairing surface cavities and honeycombed concrete. Monolevel 844SP can be used in thin screed applications to level both vertical and ho...

    Ronafix for Renders Mix E

    Ronacrete
    Admixture for weatherproof renders and waterproof / tanking renders. Ronafix is a BBA Approved single part modified styrene butadiene liquid additive for cement mortars which enhances physical and chemical properties, allows mortars to be placed in thin sectio...

    Newton 403 HydroBond

    Newton Waterproofing Systems
    Newton 403 HydroBond is a very high performance composite sheet membrane that features a locking fleece to one side and a polymer hydrophilic coating to the other....

    1 specifiers have shown an interest in this product the last month.

    Florprufe 120

    Grace
    With GraceÕs Advanced Bond Technologyª, Florprufe¨ is the industryÕs first integrally bonded vapour barrier. Florprufe forms a unique seal to the underside of concrete slabs-on-grade, creating a permanent barrier that minimises the risk of water vapour fro...

    Stopdust

    Aum
    A water based, acrylic polymer sealer for cementitious wall and floor surfaces. It is easily applied using brush or squeegee; penetrating the surface to give a durable, dust-free hygienic finish with good resistance to contamination and certain chemicals commo...

    Newton 402 Aquabit

    Newton Waterproofing Systems
    Newton 402 AquaBit is a single component waterproofing paste that is enriched with polystyrene micro spheres, that forms a crack-bridging seamless membrane for the waterproofing of the wet side of foundation walls. Engineered to be extremely workable allowing ...

    2 specifiers have shown an interest in this product the last month.

    Bostik Screedmaster Trade

    Bostik
    A two component smoothing compound which consists of a specially blended powder with a protein free synthetic gauging liquid....

    Dramix 3D Steel Fibers For Concrete Reinforcement

    Bekaert
    Often imitated, never equaled Ever since its introduction – now more than 40 years ago – the “single hook” Dramix® series has been the reference in steel fiber reinforcement, and is still outperforming competitors today. The reference in steel fiber...

    Pro 410 Paving Sealer

    Nexus Professional Surfacing Systems
    PRO-410™ is a high quality, solvent based surface sealer based on acrylic resins. It is an impregnating and non-degrading sealer that has a matt finish and enhances the colour of natural stone and concrete paving. It is used for impregnation, sealing and bin...

    1 specifiers have shown an interest in this product the last month.

    Concrete & Cement Building Products