Find, compare and price building products without wasting time on visiting, registering, & navigating multiple manufacturer websites, downloading countless technical documents for comparison, or waiting days for quotes.
Built to get you results quickly.
Products & information updated daily.
All the information you need in one place.
The largest product database in the UK.
The manual changeover manifolds are manufactured to operate in conjunction with cylinders filled up to 300 bar and are ideally suited to the requirements of industrial applications where cylinder gases are used.
These manifolds are designed to accommodate 2 equal sized banks of cylinders with sizes ranging from 2 x 1 to 2 x 6 with one bank set as operational and the other bank set as reserve.
The manifold is mounted on a rigid galvanised steel frame with integral cylinder restraint chains.
Gas is supplied to the manifold via high pressure cylinder connectors into the manifold header pipe with each individual cylinder protected by a non-return valve to prevent cylinder back filling.
The centrally mounted regulator block is fitted with high pressure isolation valves each side to provide easy duty or reserve bank selection.
N.B. The connection of a manifold regulator to BS EN ISO 7291 is essential to enable the regulation of gas from cylinder pressure to the required line pressure.
|Typical Building Sector (?)||Industrial|
|Typical Building Type (?)||Bar|
© SpecifiedBy 2019. All rights reserved.