Wraptherm is a high-performance self-adhesive membrane composite specifically developed to be applied during the refurbishment of existing buildings, and specifically where there is a requirement to enhance the thermal and airtightness performance of the building.
Wraptherm consists of a 10mm Spacetherm insulation blanket bonded to the face of Wraptite, the industry recognised vapour permeable, self-adhesive airtight membrane.
Designed to be applied to the internal face of the existing façade, Wraptherm provides a vapour permeable yet airtight layer, fully self-adhered to the substrate beneath with the added benefit of a 10mm thick layer of high-performance Spacetherm insulation blanket. Over this airtight/thermal composite framing can then be installed. The installation of Wraptherm therefore provides the added benefit of reducing the thermal bridging through the framing by the use of the continuous layer of insulation.Where required, additional thermal insulation can be included within the frame to meet the specific U-value requirements of the project.
The offset nature of the Wraptite component allows for a completely robust sealing of all of the joints within the panel thereby ensuring the continuity, integrity and robustness of the airtight layer.
• Single product airtightness and thermal bridging solution
• Ideal for Refurbishment and Façade Retention projects
• Water resistant yet vapour permeable membrane
• Leading Airtightness performance
• Reduces thermal bridging
• Continuous airtightness seal
• Tested low vapour resistance
© SpecifiedBy 2019. All rights reserved.